PCB-1515-110-05A

PCB L&T Pedal Force Transducer, 500 lbf (2224 N) rated capacity, 50% static overload protection, 2mV/V output, 10-foot Integral cable with open wire end, aluminum construction

Measurement Range: 500 lbf (2224 N)
Sensitivity: 3.30 mV/V
Size - Height: 0.84 in (21.4 mm)

Specification Notes

[1] Nominal.
[2] FS - Full Scale.
[3] Over compensated operating temperature range.
[1] Nominal.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.

	English:	SI:
Performance
Measurement Range (Full Scale Capacity)	500 lbf	2224 N
Sensitivity (output at rated capacity)	3.30 mV/V	3.30 mV/V	[1] [2]
Non-Linearity	≤0.20 % FS	≤0.20 % FS	[2]
Hysteresis	≤0.30 % FS	≤0.30 % FS	[2]
Non-Repeatability	≤0.05 % FS	≤0.05 % FS	[2]
Environmental
Overload Limit	750 lbf	3336 N
Temperature Range (Operating)	-65 to +200 °F	-54 to +93 °C
Temperature Range (Compensated)	+70 to +170 °F	+21 to +76 °C
Temperature Effect on Output (Maximum)	±0.002 %Reading/°F	±0.0036 %Reading/°C	[3]
Temperature Effect on Zero Balance (Maximum)	±0.002 %FS/°F	±0.0036 %FS/°C	[2]
Electrical
Bridge Resistance	700 Ohm	700 Ohm	[1]
Excitation Voltage	10 VDC	10 VDC	[4]
Insulation Resistance	5 GOhm	5 GOhm
Zero Balance	≤5 %RO	≤5 %RO
Physical
Size - Height	0.84 in	21.4 mm
Size - Width	3.24 in	82.3 mm
Size - Length	5.00 in	127.0 mm
Weight	1.25 lb	0.57 kg
Mounting	Straps or Hose Clamps	Straps or Hose Clamps
Housing Material	Plated Steel	Plated Steel
Sensing Element	Strain Gage	Strain Gage
Electrical Connector	pigtail ends	pigtail ends
Electrical Connection Position	Side	Side