PCB-1380-03A
    zoom_out_map

      PCB-1380-03A

      PCB L&T Rod End Load Cell, 2,000 lbf (8.9 kN) rated capacity, 50% static overload protection, 3/4-16 male & female thread, steel construction

      • Measurement Range: 2000 lbf (8896 N)
      • Size - Diameter: 1.50 in (38.1 mm)
      • Size - Height: 4.25 in (107.9 mm)
      • Electrical Connector: PT02E-10-6P

      Specification Notes


      [1] FS - Full Scale.
      [2] RO - Rated Output.
      [3] Singularly applied, i.e. no other extraneous loads.
      [4] Over compensated operating temperature range.
      [5] Nominal.
      [6] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
      [7] See Outline Drawing 45488 for complete dimensions.

      English:SI:
      Performance
      Measurement Range2000 lbf8896 N [1]
      Sensitivity (±10 %)2 mV/V2 mV/V [2]
      Non-Linearity≤0.25 % FS≤0.25 % FS
      Hysteresis≤0.15 % FS≤0.15 % FS
      Non-Repeatability≤0.05 %RO≤0.05 %RO
      Resonant Frequency9 kHz9 kHz
      Environmental
      Overload Limit3000 lbf13 kN
      Load Limit (Side Force, FX or FY)800 lbf3559 N [3]
      Load Limit (Bending Moment, MX or MY)2500 inf-lb282 Nm [3]
      Load Limit (Axial Torque, MZ)1250 inf-lb141 Nm [3]
      Temperature Range (Operating)-20 to +200 °F-28 to +93 °C
      Temperature Range (Compensated)+70 to +170 °F+21 to +77 °C
      Temperature Effect on Output (Maximum)±0.01 %Reading/°F±0.018 %Reading/°C [4]
      Temperature Effect on Zero Balance (Maximum)±0.005 %FS/°F±0.009 %FS/°C [4]
      Electrical
      Bridge Resistance350 Ohm350 Ohm [5]
      Excitation Voltage (Recommended)10 VDC10 VDC [6]
      Insulation Resistance>5000000000 Ohm>5000000000 Ohm
      Zero Balance≤1 % FS≤1 % FS
      Output PolarityPositivePositive
      Output Polarity+Tension+Tension
      Physical
      Size - Height4.25 in107.9 mm [7]
      Size - Diameter1.50 in38.1 mm [7]
      Weight1.0 lb454 g
      Mounting Thread3/4 - 16 MaleNo Metric Equivalent
      Mounting Thread3/4 - 16 FemaleNo Metric Equivalent
      Cover MaterialAnodized AluminumAnodized Aluminum
      Sensor MaterialAnodized AluminumAnodized Aluminum
      Sensing ElementStrain GageStrain Gage
      Deflection at Full Scale Capacity0.0005 in0.013 mm
      Electrical ConnectorPT02E-10-6PPT02E-10-6P

      * All specifications are at room temperature unless otherwise specified.

      Accessories


      Optional
      181-012AMating conn., 6-socket (F) w/strain relief for sensors with PT conn.1
      8311-01-10ACable assembly for sensors with PT conn., 10-ft, PT conn. to pigtails, 4-cond. cable1
      PCB-1380-03A

      Specific References

      Download

      45488-b_drawings.pdf

      PCB-1380-01A_drawings

      Download (266.14k)

      1380-03a_specs.pdf

      PCB-1380-03A_specs

      Download (1.24M)

      1380-03a_manual.pdf

      PCB-1380-03A_manual

      Download (1.24M)