PCB-101A05

General purpose ICP® pressure sensor, 100 psi, 50 mV/psi, 3/8-24 mtg thd, ground isolated

Measurement Range: 100 psi (689 kPa)
Sensitivity: (±10mV/psi)50 mV/psi (7.3 mV/kPa)
Low Frequency Response: (-5%)0.5 Hz
Resonant Frequency: >=250 kHz (>=250 kHz)
Electrical Connector: 10-32 Coaxial Jack
Weight: 0.44 oz (12.5 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
[3] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Measurement Range (for ±5V output)	100 psi	689 kPa
Useful Overrange (for ± 10V output)	200 psi	1379 kPa	[2]
Sensitivity (±10 mV/psi)	50 mV/psi	7.3 mV/kPa
Maximum Pressure (static)	1000 psi	6895 kPa
Resolution	0.002 psi	0.014 kPa
Resonant Frequency	≥250 kHz	≥250 kHz
Rise Time (Reflected)	≤2.0 µ sec	≤2.0 µ sec
Low Frequency Response (-5 %)	0.5 Hz	0.5 Hz
Non-Linearity	≤2.0 % FS	≤2.0 % FS	[1]
Environmental
Acceleration Sensitivity	≤0.01 psi/g	≤0.007 kPa/(m/s²)
Temperature Range (Operating)	-100 to +275 °F	-73 to +135 °C
Temperature Coefficient of Sensitivity	≤0.03 %/°F	≤0.054 %/°C
Maximum Flash Temperature	3000 °F	1650 °C
Maximum Shock	20000 g pk	196140 m/s² pk
Electrical
Output Polarity (Positive Pressure)	Positive	Positive
Discharge Time Constant (at room temp)	≥1.0 sec	≥1.0 sec
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	<100 Ohm	<100 Ohm
Output Bias Voltage	8 to 14 VDC	8 to 14 VDC
Electrical Isolation	100000000 Ohm	100000000 Ohm
Physical
Sensing Geometry	Compression	Compression
Sensing Element	Quartz	Quartz
Housing Material	Stainless Steel	Stainless Steel
Diaphragm	Invar	Invar
Sealing	Welded Hermetic	Welded Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Weight	0.44 oz	12.5 gm