PCB-054107-01153
Fastener Load Washer, English, 7/16-in, 15 klbf (66.7 kN), 5-ft Integral Cable w/pigtails
For more information on RS Technologies Fastener Testing products and applications, please visit:https://www.pcb.com/sensors-for-test-measurement/fastener-technology/fastener-testing
To view the RS Technologies Fastener Testing Product Catalog, please visit:
https://www.pcb.com/Contentstore/MktgContent/LinkedDocuments/Force-Torque/RS_Fast_Testing_Lowres.pdf
- Measurement Range: 15000 lb (66.7 kN)
- Sensitivity: 1.50 mV/V
- Size - Diameter: 0.943 in (23.9 mm)
- Size - Height: 0.42 in (10.7 mm)
Specification Notes
[1] Nominal.
[2] FS - Full Scale.
[3] Over compensated operating temperature range.
[1] Nominal.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[5] See Outline Drawing (LT30776) for Complete Dimensions
English: | SI: | ||
---|---|---|---|
Performance | |||
Measurement Range (Full Scale Capacity) | 15000 lb | 66.7 kN | [1] |
Sensitivity (output at rated capacity) | 1.50 mV/V | 1.50 mV/V | [1] [2] |
Non-Linearity | ±5 % FS | ±5 % FS | [2] |
Hysteresis | ±5 % FS | ±5 % FS | [2] |
Non-Repeatability | ±2 % FS | ±2 % FS | [2] |
Resonant Frequency | 10 kHz | 10 kHz | |
Environmental | |||
Overload Limit | 22500 lb | 100.05 kN | |
Temperature Range (Operating) | 0 to +200 °F | -18 to +93 °C | |
Temperature Range (Compensated) | N/A | N/A | |
Temperature Effect on Output (Maximum) | ±0.002 %Reading/°F | ±0.0018 %Reading/°C | [3] |
Temperature Effect on Zero Balance (Maximum) | ±0.002 %FS/°F | ±0.0018 %FS/°C | [2] |
Electrical | |||
Bridge Resistance | 350 Ohm | 350 Ohm | [1] |
Excitation Voltage (Recommended) | 10 VDC | 10 VDC | [4] |
Output Polarity (Compression) | Positive | Positive | |
Isolation Resistance | ≥1G Ohm | ≥1G Ohm | |
Physical | |||
Size - Height | 0.42 in | 10.7 mm | [5] |
Size - Diameter | 0.943 in | 23.9 mm | |
Fastener Size | 0.438 in | 11.11 mm | |
Through Hole Diameter | 0.443 in | 11.20 mm | |
Sensing Element | Strain Gage | Strain Gage | |
Electrical Connector | pigtail ends | pigtail ends | |
Electrical Connection Position | Side | Side |
* All specifications are at room temperature unless otherwise specified.
Accessories
Optional | ||
080922-01000 | Model 922 Portable Digital Peak Meter for measuring torque, torque and angle, or load measurement. Click-wrench calc feature and multi-limit sets. Complete with battery charger, data transfer software, and instruction manual | 0 |
080962-01000 | Model 962 Portable Transient Recorder, complete with FastPlot2 data transfer software, 8GB USB Memory Drive, USB cable for data upload/download, battery charger, and carrying case | 0 |