PCB-039230-50101/B
Rotary Torque Angle Transducer, w/Auto-ID, 100 lbf-in (11.3 Nm), 1/4-inch Hex Drive, 10-pin PT Receptacle
For more information on RS Technologies Fastener products and applications, please visit:https://www.pcb.com/sensors-for-test-measurement/fastener-technology
and click the link for Fastener Testing or Fastener Assembly
- Measurement Range: 100 lbf-in (11.3 Nm)
- Sensitivity: 2.0 mV/V (2.0 mV/V)
- Non-Linearity: <=0.25 % FS
- Maximum Speed: 5000 RPM
Specification Notes
[1] FS - Full Scale.
[2] Matched for mV/V and shunt calibration.
[3] Matched to ±0.25% F.S.
[4] Over compensated temperature range.
[1] FS - Full Scale.
[5] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[6] A-B Track 90° Phase Difference, Flat Over Operating Speed
[7] Magnetic Encoder Specifications.
[8] Matched with 43.575 kOhm Precision Resistor.
[9] See Outline Drawing 45188 for Complete Dimensions
[10] Per ANSI B107.4 Specifications
[11] See PCB Declaration of Conformance PS119 for details.
English: | SI: | ||
---|---|---|---|
Performance | |||
Measurement Range (Full Scale Capacity) | 100 lbf-in | 11.3 Nm | |
Sensitivity (output at rated capacity) | 2.0 mV/V | 2.0 mV/V | [3] |
Non-Linearity | ≤0.25 % FS | ≤0.25 % FS | [1] |
Hysteresis | ≤0.25 % FS | ≤0.25 % FS | [1] |
Non-Repeatability | ≤0.05 % FS | ≤0.05 % FS | [1] |
Interchangeabilty | ≤0.30 % FS | ≤0.30 % FS | [1] [2] |
Environmental | |||
Overload Limit | 150 lbf-in | 16.9 Nm | |
Temperature Range (Operating) | 0 to +200 °F | -18 to +93 °C | |
Temperature Range (Compensated) | +70 to +150 °F | +21 to +66 °C | |
Temperature Effect on Output (Maximum) | ±0.002 %Reading/°F | ±0.0018 %Reading/°C | [4] |
Temperature Effect on Zero Balance (Maximum) | ±0.002 %FS/°F | ±0.0018 %FS/°C | [4] |
Electrical | |||
Bridge Resistance | 350 Ohm | 350 Ohm | |
Excitation Voltage | 10 VDC | 10 VDC | [5] |
Insulation Resistance | ≥5 GOhm | ≥5 GOhm | |
Zero Balance | ≤2 % FS | ≤2 % FS | [1] |
Counts Per Revolution | 1472 | 1472 | [7] |
Resolution w/ Quadrature | 1/4 ° | 1/4 ° | [7] |
Output Voltage | High 5V to Low 0.5V | High 5V to Low 0.5V | [7] |
Power Required (maximum) | 5 VDC @ 120mA | 5 VDC @ 120mA | [7] |
Magnetic Encoder (Poles) | 368 | 368 | [7] |
Magnetic Encoder (Ouput) | See Note | See Note | [6] [7] |
Shunt Calibration | ≤0.25 % FS | ≤0.25 % FS | [1] [8] |
Auto ID | TTL Proprietary | TTL Proprietary | |
Physical | |||
Size - Shaft Length | 4.25 in | 108.0 mm | [9] |
Size - Housing Length | 2.30 in | 58.4 mm | [9] |
Size - Housing Height | 2.00 in | 50.8 mm | |
Weight | .75 lb | 340 gm | |
Mounting | 1/4 inch Hex Drive | 6.35 mm Hex Drive | [10] |
Sensing Element | Strain Gage | Strain Gage | |
Housing Material | Aluminum | Aluminum | |
Shaft Material | Steel | Steel | |
Electrical Connector | PT02H-12-10P | PT02H-12-10P | |
Maximum Speed | 5000 RPM | 5000 RPM |
* All specifications are at room temperature unless otherwise specified.
Accessories
Optional | ||
080920-01000 | Model 920 Portable Digital Peak Meter for torque, torque-angle or load measurement; Click-Wrench calc feature, w/battery charger, instruction manual & shoulder strap | 1 |
080962-01000 | Model 962 Portable Transient Recorder, complete with FastPlot2 data transfer software, 8GB USB Memory Drive, USB cable for data upload/download, battery charger, and carrying case | 1 |
097000-34445 | Cable, Coiled, 3-ft, RS Instrument to 10-pin Transducers | 1 |
4242R-000630 | 1 | |
Supplied | ||
7122R-04352A | Precision Cal Resistor 43.575K Ohm | 1 |