PCB-113B23
| basic data | |||
| measuring range (±5 V output range) | 10,000 psi | kPa 68.950 | |
| sensitivity (±0, 03 mV / psi) | 0.5 mV / psi | 0.073 mV /. kPa | |
| maximum pressure | of15,000 psi | kPa 103.420 | |
| resolution | 40 mpsi | 0.28 kPa | [1] |
| Resonance frequency | ≥ 500, 000 Hz | ||
| rise time | ≤ 1.0 µs | ||
| lower limiting frequency (-5%) | 0.0005 Hz | ||
| Linearity | ≤ 1.0% FS | [2] | |
| conditions | |||
| acceleration sensitivity | ≤ 0.002 psi/g | ≤ 0.0014 kPa / ( m/s 2) | |
| temperature range (operation) | -100 … 275 ° F | -73 … 135 ° C | |
| Temperature coefficient of sensitivity | ≤ 0.03 %/°F | ≤ 0,054 %/°C | [1] |
| maximum shock (for fraction of a second) | 3,000 ° F | 1.649 ° C | |
| maximum Acceleration | 2.000 g PK | 19.614 m/s² pk | |
| Maximum shock resistance | 20,000 g pk | 196.140 m/s² pk | |
| Technical characteristics | |||
| Output polarity (positive pressure) | positive | ||
| Discharging charging time constant (at room temperature) | ≥ 1,000 s | ||
| supply | 20 … 30 V DC | ||
| Constant power supply | 2 … 20 mA | ||
| output impedance | < 100 Ω | ||
| Bias voltage | 8 … 14 V DC | ||
| Physical properties | |||
| geometry of the sensor element | compression principle | ||
| sensor element | quartz | ||
| Housing material | 17-4 (Stainless steel) | ||
| membrane | INVAR | ||
| Sealing | hermetically sealed welded | ||
| Electrical connection | 10-32-coaxial socket | ||
| weight | 0.21 oz | 6.0 grams | |
| notes | |||
| [1] | Typically | ||
| [2] | zero-based balancing line, determined using the method of least squares | ||
| [3] | details: see PCB Declaration of conformance PS023 | ||
| equipment | |||
| 060A03 | installation sleeve, 5/16-24-2A thread, 1/4 "hex, (stainless steel) | -1 | |
| 060A05 | installation sleeve, M7 x 0.75-6 g-thread | -1 | |
| 065A02 | sealing ring for flush mounting, 0,248 "outside x 0.219" x 0.015 "high,. Brass | 3 | |
| 065A05 | gasket spacer, 0,248 "outside x 0,221" x 0.240 "high, 17-4 (Stainless steel) | -1 | |
| (S) Emralon coating | |||
| Coating | Emralon | ||
| electrical insulation | ≥ 100 MΩ | ||
| Equipment | |||
| 065A08 | insulation ring, 0.250 "outside x 0,218" x 0.027 "high, anodized aluminium | 3 | |
| 065A22 | seal, 0.250 "x outside 0,218" x 0.015 "high, Torlon or Vespel | 3 | |
| (S) stainless steel diaphragm | |||
| (W) waterproof cable connection | |||
| Accessories | |||
| 060A03 | installation sleeve, 5/16-24-2A thread, 1/4 "hex, ( Stainless steel) | -1 | |
| (WM) waterproof cable connection | |||
| equipment | |||
| 060A05 | installation sleeve, M7 x. 0.75-6 g-thread | -1 |
PCB-113B23
