PCB-113B21
- ICP® high frequency pressure sensor with INVAR-membrane,
- Beschleunigungskompensiert,
- Measuring range 1.379 kPa,
- Sensitivity 3.6 mV / kPa,
- Lower limiting frequency 0.5 Hz,
- 10-32 female connector
| basic data | |||
| Measurement range (output range ± 5 V) | 200 psi | 1,379 kPa | |
| Usable overload range (output range is ± 10 V) | 400 psi | 2,758 kPa | [3] |
| Sensitivity (± 15%) | 25 mV / psi | 3.6 mV / kPa | |
| maximum pressure | 1,000 psi | 6895 kPa | |
| resolution | 1.0 mpsi | 0.007 kPa | [1] |
| resonant frequency | ≥500.000 Hz | ||
| rise time | ≤1,0 microseconds | ||
| Lower limit frequency (-5%) | 0.5 Hz | ||
| linearity error | ≤1,0% FS | [2] | |
| Operating conditions | |||
| acceleration sensitivity | ≤0,002 psi / g | ≤0,0014 kPa / (m / s) | |
| The temperature range (operation) | -100 ... 275 ° F | -73 ... 135 ° C | |
| Temperature coefficient of sensitivity | ≤0,03% / ° F | ≤0,054% / ° C | [1] |
| Maximum temperature shock (for split second) | 3000 ° F | 1649 ° C | |
| maximum acceleration | 2000 g pk | 19,614 m / spk | |
| Maximum shock resistance | 20,000 g pk | 196,140 m / s pk | |
| Technical characteristics | |||
| Output polarity (positive pressure) | positive | ||
| Discharging time (at room temperature) | ≥1,0 s | ||
| supply voltage | 20 ... 30 V DC | ||
| Constant current supply | 2 ... 20 mA | ||
| output impedance | <100 Ω | ||
| Bias voltage | 8 ... 14 V DC | ||
| physical properties | |||
| Geometry of the sensor element | compression principle | ||
| sensor element | quartz | ||
| housing material | 17-4 (stainless steel) | ||
| membrane | Invar | ||
| seal | Hermetically sealed | ||
| electrical connection | 10-32 coaxial | ||
| Mass (with mounting sleeve) | 0.21 oz | 6.0 grams | |
| Hints | |||
| [1] | typically, | ||
| [2] | Zero-based line of best fit, determined by the method of least squares | ||
| [3] | For an output range up to 10 V, the supply voltage at least 24 V has to DC , respectively. At low bias voltage of the sensor, no negative output range up to -10 V can be used. | ||
| [4] | Details: see PCB Declaration of Conformance PS023 | ||
| included supply | |||
| 060A03 | Mounting sleeve, 5 / 16-24-2A threads, 1/4 "hex, (stainless steel) | -1 | |
| 060A05 | Mounting sleeve, M7 x 0,75-6g thread | -1 | |
| 065A02 | Sealing ring for flush mounting, 0.248 "outside x 0.219" x 0.015 inner "high, brass | -3 | |
| 065A05 | Distance-sealing ring, 0.248 "outside x 0.221" x 0.240 inwardly "tall, 17-4 (stainless steel) | -1 | |
| (E) coating Emralon | |||
| coating | Emralon | ||
| electrical insulation | 100 M | ||
| included supply | |||
| 065A08 | Isolation ring, 0.250 "outside x 0.218" x 0.027 inner "high, anodized aluminum | -3 | |
| 065A22 | Seal, 0.250 "outside x 0.218" x 0.015 inner "high, Torlon or Vespel | -3 | |
| (S) stainless steel diaphragm | |||
| (W) Waterproof cable connection | |||
| included supply | |||
| 060A03 | Mounting sleeve, 5 / 16-24-2A threads, 1/4 "hex, (stainless steel) | -1 | |
| (WM) watertight cable connection | |||
| included supply | |||
| 060A05 | Mounting sleeve, M7 x 0,75-6g thread | -1 |
PCB-113B21
