PCB-137B23A
zoom_out_map

PCB-137B23A

  • ICP® pressure sensor,
  • For blast pressure measurements
  • Measuring range 345 kPa,
  • Sensitivity 14.5 mV / kPa,
  • 10-32 female connector
  • basic data
    measuring range (±5 V output range) 50 psi 345 kPa
    usable range (output range ±10 V) 100 psi 690 kPa [2]
    Sensitivity (±15%) ≥ 100 MΩ / psi 14.5 mV / kPa
    maximum pressure 1,000 psi 6.895 kPa
    release Sung 0.01 psi 0.069 kPa [3]
    resonance frequency ≥ 400,000 Hz
    rise time (unwittingly pressure) ≤ 6.5 µs
    Linearity ≤ 1.0% FS [1]
    conditions
    temperature range (operation) -100 … 275 ° F -73 … 135 ° C
    Temperature coefficient of sensitivity ≤0,05 %/°F ≤ 0,090 %/°C
    technical
    Discharge charge time constant (at room temperature) ≥ 0.2 s
    power 22 … 30 V DC
    Constant power supply 2 … 20 mA
    output impedance ≤ 100 Ω
    Bias voltage 8 … 14 V DC
    physical properties
    geometry of the sensor element compression principle
    Sensor element quartz
    housing material aluminum
    membrane INVAR
    Waterproofing epoxy resin
    electrical connection 10-32-coaxial socket
    dimensions 12.5 oz 353 gram [3]
    Notes
    [1] zero-based balancing line, determined using the method of least squares
    [2] for output range supply voltage up to 10 V must be at least 24 V DC. At low bias voltage of the sensor, no negative output range is usable up to-10 V.
    [3] Typically
    [4] details: see PCBs Declaration of conformance PS023
    equipment
    085A43 Konnektorschutz -1
    PC-6 calibration series 134, 137, and 138 -1
    PCB-137B23A

    Specific References

    Download

    137B23A_drawing.PDF

    Technical drawing

    Download (330.13k)

    137B23A_manual.PDF

    Operating instructions

    Download (1.27M)

    137B23A_specs.PDF

    Technical data sheet

    Download (373.07k)