PCB-116B03
| basic data | |||
| sensitivity (±15%) | 6 pC/psi | 0,870 pC/kPa | |
| measuring range | 100 psi | 690 kPa | |
| Maximum static pressure | of3,000 psi | 20.685 kPa | |
| Resolution | 0.0003 psi | kPa 0,0021 | [2] |
| resonance frequency | ≥ 55,000 Hz | ||
| rise time (reflected pressure) | ≤ 9 µs | ||
| linearity | ≤ 1% FS | [1] | |
| conditions | |||
| Acceleration sensitivity | ≤ 0.002 psi/g | ≤ 0,0014 kPa/(m/s²) | |
| temperature range (operation) | -400 … 750 ° F | -240 … 399 ° C | [3] |
| Temperature coefficient of sensitivity | ≤ 0.04 %/°F | ≤ 0.072 %/°C | |
| maximum shock (for fraction of a second) | 3,000 ° F | 1.649 ° C | |
| Maximum shock resistance | 2,000 g pk | 19.620 m/s² PK | |
| Technical features | |||
| output polarity (positive pressure) | negative | ||
| capacity | 30 pF | [4] | |
| Insulation resistance (at 315 ° C) | > 1000 M Ω | ||
| insulation resistance (at 399 ° C) | ≥ 100 MΩ | ||
| Insulation resistance (at room temperature) | > 100,000 M Ω | ||
| Physical properties | |||
| Sensor element | quartz | ||
| Housing material | 316 L (stainless steel) | ||
| diaphragm | 316 L (stainless steel) | ||
| sealed | sealed densely welded | ||
| electrical connection | 10-32-coaxial socket | ||
| ground | 0,717 oz | 20.3 grams | |
| Notes | |||
| [1] | zero-based balancing line, determined using the method of least squares | ||
| [2] | resolution depending on the cable length and the range setting of the signal processing | ||
| [3] | atUsing a blocking capacitor and hardline cable | ||
| [4] | typically | ||
| equipment | |||
| 060A12 | Einbauhü LSE, 9/16-18-2A thread, 9/16 "hex | -1 | |
| 060A14 | metric mounting sleeve, M14 x 1.25-6 g-thread, 14 mm hex, (stainless steel) | -1 | |
| 065A37 | gasket, 0,497 "outside x 0,437" x 0.025 "tall, brass | 3 |
PCB-116B03
