PCB-357A09
| basic data | |||
| sensitivity (±20%) | 1.7 pC/g | 0.17 pC/(m/s²) | |
| range | ±2. 000 g PK | ±19. 620 m/s² pk | |
| frequency range (+ 5%) | ,10,000 Hz | [2] | |
| Frequency range (+ 10%) | 13,000 Hz | [2] | |
| resonance frequency | ≥ 50,000 Hz | ||
| linearity | ≤ 1% | [4] | |
| Transverse acceleration sensitivity | ≤ 5% | [3] | |
| conditions | |||
| (shock) overload limit | ± 10.000 g PK | ±98.100 m/s² pk | |
| Temperature range | -100 … 350 ° F | -73 … 177 ° C | |
| strain sensitivity (base area) | ≤ 0.10 g/µε | ≤ 1.0 (m/s²)/µε | [1] |
| technical characteristics | |||
| capacity | 310 pF | [1] | |
| insulation resistance (at 21 ° C) | > 10,000 M Ω | ||
| output polarity | negative | ||
| Physical properties | |||
| Sensor element | ceramic | ||
| Geometry of the sensor element | shear principle | ||
| housing material | titanium | ||
| sealing | Epoxy resin | ||
| size - height | 0.14 in | 3.6 mm | |
| size - length | 0.45 in | 11.4 mm | |
| Size - width | 0.25 in | 6.4 mm | |
| mass | 0.02 oz | 0.6 grams | [1] |
| wiring | 3-56 coaxial connector | ||
| connection position | side | ||
| attachment | bonding | ||
| notes | |||
| [1] | typically | ||
| [2] | the lower cut-off frequency depends on the used signal conditioning electronicsfrom. | ||
| [3] | transverse acceleration sensitivity typically ≤ 3% | ||
| [4] | zero-based balancing line, determined with the method of least squares | ||
| equipment | |||
| 030A10 | coaxial cable, 3 m, 3-56-plug to 10-32 | -1 | |
| 039A27 | transfer tool for the models 352A21, 352 C-22, 352A25, 357A09, 357 C-10 | -1 | |
| 080A109 | mounting wax | -1 | |
| ACS-1 | frequency response, traceable to NIST (10 Hz up to the upper 5% point) | -1 | |
| (P) positive Output polarity | |||
PCB-357A09
