PCB-(M)356A71
| basic data | |||
| sensitivity (±30%) | 10 pC/g | 1.02 pC/(m/s²) | |
| range | ±500 g pk | ±4. 905 m/s 2 pk | |
| frequency range (+ 5%) | 5,000 Hz | [3] | |
| Frequency range (+ 10%) | 7,000 Hz | [3] | |
| resonance frequency | ≥25,000 Hz | ||
| linearity | ≤1% | [1] | |
| Transverse acceleration sensitivity | ≤5% | ||
| conditions of use | |||
| Overload limit (shock) | ±5. 000 g PK | ±49. 000 m/s² pk | |
| Temperature | -95 … 490 ° F | 70 … 254 ° C | |
| technical | |||
| capacity | 690 pF | [2] | |
| Insulation resistance (at 70 ° F [21 ° C]) | > 1.000.000 MΩ | ||
| Insulation resistance (at 490 ° F [254 ° C]) | [2] | ||
| Output polarity | negative | ||
| physical properties | |||
| sensor element | ceramic | ||
| geometry the sensor element | shear principle | ||
| housing material | titanium | ||
| sealing | hermetic | ||
| Size - length | 0.96 in | 24.4 mm | |
| size - width | 1.00 in | 25.4 mm | |
| size ße - height | 0.50 in | 12.7 mm | |
| weight | 0.8 oz | 22.7 grams | [2] |
| electrical connection | 10-32-coaxial socket | ||
| Mounting | hole | ||
| Assembly torque | 8 … 10 in-lb | 90 … 113 NCM | |
| notes | |||
| [1] | zero-based balancing line, determined using the method of least squares | ||
| [2] | Typically | ||
| [3] | the lower cut-off frequency depends on the used signal conditioning electronics. | ||
| Accessories | |||
| 039A22 | Allen wrench, 7/64 "Allen | -1 | |
| 080A170 | adhesive attachment (for the Model 356A71) | -1 | |
| 080A90 | glue | -1 | |
| 081A94 | mounting screw 6-32 UNC, 0.75 "long | 2 | |
| ACS-1 T | frequency response for Triaxial accelerometer, traceable to NIST, 10 Hz up to the upper 5% frequency | -1 | " |
| (P) positive output voltage | |||
| (M) metric mounting | |||
| equipment | |||
| M080A170 | adhesive mounting | -1 | |
| M081A94 | mounting bolts, M3 X 0.50 X 20 mm | -2 | |
| M039A22 | Allen key for use with thread M3 | -1 |
PCB-(M)356A71
