PCB-3713B1230G
basic data | |||
sensitivity (±5%) | 66.7 mV / g | 6.80 mV/(m/s²) | [1] |
range | ±30 g PK | ±294 m/s 2 pk | |
frequency range (±5%) | 0 … 1,000 Hz | ||
Frequency range (± 10%) | 0 … 1500 Hz | ||
resonance frequency | ≥ 4,000 Hz | ||
phase response (100 Hz) | < 10 ° | ||
wide band resolution | 3.5 mg rms | 0.034 m/s² RMS | [2] |
Linearitä avoidable | ≤ 1% | [3] | |
transverse acceleration sensitivity | ≤ 3% | ||
conditions of use | |||
Overload limit (shock) | ±3. 000 g pk | ±29. 420 m/s² pk | |
Temperature range (operation) | -65 … 250 ° F | -54 …121 ° C | |
temperature range (storage) | -65 … 250 ° F | -54 … 121 ° C | |
Temperature coefficient of sensitivity | ≤3% | [4] | |
Temperature coefficient of sensitivity the zero point | ±2% FSO | [4] [5] | |
strain sensitivity (base area) | 0.0002 g/µε | 0.002 (m/s²)/µε | [2] |
magnetic sensitivity | 27.9 | µg/GS/2.8 (m/s²) / T | [2] |
technical characteristics | |||
Supply | 6 … 30 V DC | ||
power | &le≤6 mA | ||
Output impedance | ≤ 100 Ω | ||
Spannungsoffset | ± 40 mV DC | [6] | |
spectral noise (1) | 330 µg /. √ Hz | 3.237 (µm / s ²) / √ Hz | [2] |
electrical insulation (housing) | ≥ 100 MΩ | ||
physical properties"; Full scale output": maximum output signal of the measuring range (4 V DC). | |||
[6] | offset at 3 meters cable length (type 037) | ||
[7] | details: see PCB Declaration of Conformance PS027 | ||
Equipment | |||
080A12 | adhesive mounting | -1 | |
081 B 05 | Mounting bolts (10-32 on 10-32) | -1 | |
ACS-103T | calibration of amplitude and phase response of 2 Hz up to the upper 5% frequency for Triaxial sensor | -1 | |
M081B05 | Mounting bolts 10-32 to M6 x 0.75 | -1 |