PCB-3713B1150G
    zoom_out_map

      PCB-3713B1150G

    • Triaxial MEMS accelerometer,
    • Suitable for measuring static accelerations,
    • Measurement range 50 g,
    • Sensitivity 40 mV / g,
    • Frequency range 0 … 1,000 Hz,
    • Supply voltage 6 … 30 V DC,
    • 9-pin female connector on the side
    • basic data
      sensitivity (±5%)40 mV / g4.1 mV/(m/s²)[1]
      range±50 g pk ±490, 5 m/s 2 pk
      frequency range (±5%)0 … 1,000 Hz
      Frequency range (± 10%)0 … 1,300 Hz
      resonance frequency≥ 5,100 Hz
      phase response (100 Hz)< 10 °
      wide band resolution6.0 mg rms0.059 m/s² RMS[2]
      Linearitä avoidable≤ 1%[3]
      transverse acceleration sensitivity≤ 3%
      conditions of use
      Overload limit (shock)±3. 000 g pk±29. 420 m/s² pk
      Temperature range (operation)-65 … 250 ° F-54 …121 ° C
      temperature range (storage)-65 … 250 ° F-54 … 121 ° C
      Temperature coefficient of sensitivity≤3%[4]
      Temperature coefficient of sensitivity the zero point±2% FSO[4] [5]
      strain sensitivity (base area)0.0001 g/µε0.001 (m/s²)/µε[2]
      magnetic sensitivity40µg/Gs/3.9 (m/s²) / T[2]
      technical characteristics
      Supply6 … 30 V DC
      power&le≤6 mA
      Output impedance≤ 100 Ω
      Spannungsoffset± 40 mV DC[6]
      spectral noise (1)600 µg /. √ Hz5,890 (µm / s ²) / √ Hz[2]
      electrical insulation (housing)≥ 100 MΩ
      physical properties
      Housing materialtitanium
      sealinghermetically sealed
      size - length0.8 in20.3 mm
      Size - width0.8 in20.3 mm
      size - height0.8 in20.3 mm
      Mass0.6 oz17.3 grams
      electrical connector9-Pin
      connection positionside
      Mounting thread10-32 female thread
      notes
      [1]measured at 100 Hz, 10 g RMS
      [2]typically
      [3]zero-based balancing line, determined using the method of least squares
      [4]-54 … 121 ° C, reference 24 ° C
      [5]FSO = "Full Scale Output": maximum output (4 V measuring range DC).
      [6]offset at 3 meters cable length (type 037)
      [7]details: see PCB Declaration of Conformance PS027
      Equipment
      080A12adhesive mounting-1
      081 B 05Mounting bolts (10-32 on 10-32)-1
      ACS-103Tcalibration of amplitude and phase response of 2 Hz up to the upper 5% frequency for Triaxial sensor-1
      M081B05Mounting bolts 10-32 to M6 x 0.75-1
      PCB-3713B1150G

      Specific References

      Download

      3713B1150G_drawing.PDF

      Technical drawing

      Download (301.76k)

      3713B1150G_manual.PDF

      Operating instructions

      Download (952.88k)

      3713B1150G_specs.PDF

      Technical data sheet

      Download (421.91k)