PCB-3713B112G
zoom_out_map

PCB-3713B112G

  • Triaxial MEMS accelerometer,
  • Suitable for measuring static accelerations,
  • Measurement range 2 g,
  • Sensitivity 1,000 mV / g,
  • Frequency range 0 … 250 Hz,
  • Supply voltage 6 … 30 V DC,
  • 9-pin female connector on the side
  • basic data
    sensitivity (±5%) 1,000 mV / g 101.9 mV/(m/s²) [1]
    range ±2 g PK ±19, 6 m/s 2 pk
    Frequency range (±5%) 0 … 250 Hz
    frequency range (± 10%) 0 … 350 Hz
    Resonance frequency ≥ 1,300 Hz
    phase response (10 Hz) < 2,5 °
    wide band resolution 0.25 mg rms 0.0025 m/s² RMS [2]
    Linearity ≤ 1% [3]
    transverse acceleration sensitivity ≤ 3%
    conditions of use
    (Shock) overload limit ± 3.000 g pk ±29. 420 m/s² pk
    Temperature range (operation) -65 … 250 ° F -54 …121 ° C
    temperature range (storage) -65 … 250 ° F -54 … 121 ° C
    Temperature coefficient of sensitivity ≤3% [4]
    Temperature coefficient of sensitivity the zero point ±2% FSO [4] [5]
    strain sensitivity (base area) 0.0001 g/µε 0.001 (m/s²)/µε [2]
    magnetic sensitivity 43.7 µg/GS/4.29 (m/s²) / T [2]
    technical characteristics
    Supply 6 … 30 V DC
    power ≤ 5 mA
    Output impedance ≤ 100 Ω
    Spannungsoffset ± 40 mV DC [6]
    spectral noise (1) 22.9 µg /. √ Hz 225 (µm / s ²) / √ Hz [2]
    electrical insulation (housing) ≥ 100 MΩ
    physical properties
    Housing material titanium
    sealing hermetically sealed
    size - length 0.8 in 20.3 mm
    size - width 0.8 in 20.3 mm
    size - height 0.8 in 20.3 mm
    Weight 0.6 oz 17.3 grams
    electrical connector 9-Pin
    connection position side
    Mounting thread 10-32 female thread
    notes
    [1] measured at 5 Hz, ½ g RMS
    [2] typically
    [3] zero-based balancing line, determined using the method of least squares
    [4] -54 … 121 ° C, reference 24 ° C
    [5] FSO = "Full Scale Output": maximum output (4 V measuring range (DC).
    [6] offset at 3 meters cable length (type 037)
    [7] details: see PCB Declaration of Conformance PS027
    Equipment
    080A12 adhesive mounting -1
    081 B 05 Mounting bolts (10-32 on 10-32) -1
    ACS-85T calibration of amplitude and phase response for Triaxial sensor -1
    M081B05 Mounting bolts 10-32 to M6 x 0.75 -1
    PCB-3713B112G

    Specific References

    Download

    3713B112G_drawing.PDF

    Technical drawing

    Download (301.76k)

    3713B112G_manual.PDF

    Operating instructions

    Download (554.93k)

    3713B112G_specs.PDF

    Technical data sheet

    Download (24.03k)