PCB-3711B1150G
    zoom_out_map

      PCB-3711B1150G

    • MEMS accelerometer,
    • Suitable for measuring static accelerations,
    • Measurement range 50 g,
    • Sensitivity 40 mV / g,
    • Frequency range 0 … 1,000 Hz,
    • Supply voltage 6 … 30 V DC,
    • 4-pin female connector on the side
    • basic data
      sensitivity (±5%)40 mV / g4.1 mV/(m/s²) 
       
      range±50 g pk ±490 m/s 2 pk 
       
      frequency range (±5%)0 … 1,000 Hz  
       
      Frequency range (± 10%)0 … 1500 Hz  
       
      Resonance frequency≥5,100 Hz  
       
      phase response (100 Hz)< 10 °  
       
      wide band resolution6.0 mg rms0.06 m/s² RMS[3]
       
      linearity≤1% [2]
       
      Transverse acceleration sensitivity≤3%  
      conditions of use
      Overload limit (shock)±3. 000 g pk±29. 420 m/s² pk 
       
      temperature range (operation)-65 … 250 ° F-54 …121 ° C 
       
      temperature range (storage)-65 … 250 ° F-54 … 121 ° C 
       
      Temperature coefficient of sensitivity≤3% [1]
       
      Temperature coefficient of sensitivity the zero point±2% FSO [1] [4]
       
      strain sensitivity (base area)0.0001 g/µε0.001 (m/s²)/µε[3]
       
      magnetic sensitivity40µg/Gs/3.9 (m/s²) / T[3]
      technical characteristics
      Supply6 … 30 V DC  
       
      power≤6 mA  
       
      Output impedance≤100 Ω  
       
      Spannungsoffset40 … 40 mV DC [5]
       
      spectral noise (1)600 µg / √Hz5,890 (µm / s ²) / √Hz[3]
       
      electrical insulation (housing)>100 MΩ  
      physical properties
      Housing materialTitanium  
       
      Sealedsealedclose  
       
      size - height0.45 in11.4 mm 
       
      size - length0.85 in21.6 mm 
       
      Size - width0.85 in21.6 mm 
       
      mass0.58 oz16.3 grams 
       
      wiring4-pin  
       
      Connection positionside  
       
      mountinghole  
      notes
      [1]-54 … 121 ° C, reference 24 ° C  
       
      [2]zero-based balancing line, determined using the method of least squares  
       
      [3]typically  
       
      [4]FSO = "Full Scale Output": maximum output signal of the measuring range (4 V DC).  
       
      [5]offset at 3 meters cable length (type 010)  
       
      [6]details: see PCB Declarationof conformance PS027  
      equipment
      080A152mounting clip-1 
       
      081A113mounting screw2 
       
      ACS-103calibration of amplitude and phase response of 2 Hz up to the upper 5% frequency-1 
       
      M081A113metric mounting screw2 
      PCB-3711B1150G

      Specific References

      Download

      3711B1150G_drawing.PDF

      Technical drawing

      Download (1.18M)

      3711B1150G_manual.PDF

      Operating instructions

      Download (1.75M)

      3711B1150G_specs.PDF

      Technical data sheet

      Download (413.3k)