PCB-353B51

PCB-353B51

  • ICP® vibration sensor,
  • Measuring range 10 g,
  • Sensitivity500 mV / g,
  • Frequency range 1 … 2,000 Hz,
  • 10-32 female connector on the side
  • basic data
    sensitivity (±5%)500 mV / g51.0 mV/(m/s²)
    range±10 g pk ±98, 1 m/s 2 pk
    frequency range (±5%)1 … 2,000 Hz
    Frequency range (± 10%)0.7 … 4,000 Hz
    frequency range (± 3 dB)0.35 … 7,000 Hz
    Resonance frequency≥ 14.000 Hz
    wide band resolution0.0004 g RMS0.004 m/s² RMS[3]
    Linearity≤ 1%[1]
    transverse acceleration sensitivity≤ 5%[2]
    conditions of use
    Overload limit (shock)±4. 000 g pk±39. 240 m/s² pk
    Temperature range (operation)-65 … 250 ° F-54 … 121 ° C
    strain sensitivity (footprint)0.0002 g/µε0.002 (m/s²)/µε[3]
    specifications
    power supply23 … 30 V DC
    Constant power supply2 … 20 mA
    output impedance≤ 100 Ω
    Bias voltage11 … 16 V DC
    Discharging charging time constant0.5 … 2.0 s
    settling<15 s
    Spectral noise (1 Hz)200 µg / √ Hz1,962 (µm / s ²) / √ Hz
    spectral noise (10 Hz)16 µg / √ Hz157 (µm / s ²) / √ Hz[3]
    Spectral noise (100 Hz)5 µg / √ Hz49 (µm / s ²) / √ Hz[3]
    spectral noise (1,000 Hz)1 µg /.√ Hz10 (µm / s ²) / √ Hz[3]
    electrical insulationNo (optionally available)
    physical properties
    Gr öße - height0.85 in21.6 mm
    size - hex0.75 in19.1 mm
    weight1.1 oz32 grams[3]
    Sensor elementquartz
    geometry of the sensor elementshear principle
    housing material Titanium
    sealinghermetically sealed welded
    electrical connection10-32-coaxial socket
    Connection positionside
    mounting thread10-32 female thread
    notes
    [1]zero-based balancing line, determined using the method of least squares
    [2]transverse acceleration sensitivity typically ≤ 3%
    [3]typically
    [4]details:see PCBs Declaration of conformance PS023
    equipment
    080A109mounting wax-1
    080A12adhesive mounting-1
    081 B 05mounting bolts (10-32 on 10-32)-1
    ACS-1frequency response, traceable to NIST (10 Hz up to the upper 5% point)-1
    M081B05Mounting bolts 10-32 to M6 x 0.75-1
    (Q) increased discharge charge time constant
    sensitivity (±10%)500 mV / g51.0 mV/(m/s²)
    frequency range (±5%)0.1 Hz0.1 s
    frequency range (± 10%)Hz 0.070.07 s
    discharging charging time constant≥ 10s
    Settling< 300 s
    equipment
    ACS-4low frequency calibration (phase and amplitude) of 0.5 … 10 Hz-1
    (J) mass insulation
    frequency range (±5%)2,000 Hz
    Frequency range (± 10%)4,000 Hz
    resonance frequency12,000 Hz
    electrical insulation≥ 100 MΩ
    size - hex0.75 in19.1 mm
    size - height0.90 in22.9 mm
    (W) waterproof cable connection
    connection positionside

    21 other articles of the same category: