PCB-301A12
- ICP® calibration reference-Shock Accelerometer
- Measuring range 10,000 g
- Sensitivity 0.5 mV / g
- Frequency range 1 ... 10,000 Hz
- 10-32 connector on the side
| specifications | |||
|---|---|---|---|
| basic data | English units | SI units | |
| Sensitivity (± 20%) | 0,5 mV/g | 0,051 mV/(m/s²) | |
| measuring range | ± 10,000 g pk | ±98.100 m/s²pk | |
| Frequency range (± 5%) | 1 … 10.000 Hz | ||
| resonant frequency | ≥30.000 Hz | ||
| Broadband resolution | 0,02 gRMS | 0,20 | [1] |
| Linearitätsfehler (per 1.000 g (9.810 m/s²)) | ≤0,1 % | ||
| Lateral acceleration sensitivity | ≤3 % | ||
| Operating conditions | |||
| Overload limit | ± 12.500 g pk | ±122.625 m/s²pk | |
| temperature range | -65 … 250 °F | -54 … 121 °C | |
| Technical characteristics | |||
| supply voltage | 18 … 30 VDC | ||
| Constant current supply | 2 ... 20 mA | ||
| output impedance | <100 Ω | ||
| Bias voltage | 8 … 12 VDC | ||
| discharging | 0,5 … 2,0 s | [1] | |
| Physical properties | |||
| Size - height | 1,43 in | 36,3 mm | |
| Size - hexagon | 5/8 in | 15,9 mm | |
| Mass | 1,5 oz | 42 grams | [1] |
| sensor element | quartz | ||
| Geometry of the sensor element | Scherprinzip | ||
| housing material | 17-4 (stainless steel) | ||
| seal | Hermetically sealed | ||
| Electrical connection | 10-32 coaxial | ||
| port location | Laterally | ||
| Mounting thread (mounting on shaker) | 1/4 "-28 male thread | ||
| Mounting thread (mounting of the test object) | 1/4 "-28 female thread | ||
[2]
| Hints | |||
|---|---|---|---|
| [1] | typically, | ||
| [2] | Details: siehe PCB Declaration of Conformance PS023 | ||
| included supply | ||
|---|---|---|
| 081A08 | Mounting bolts (10-32 to 1/4 "-28) | (2) |
| 081B20 | Mounting bolt, with shoulder (1/4 "-28 to 1/4" -28) | (2) |
| ACS-1 | Frequency response, traceable to NIST (10 Hz to the upper 5% point) | (1) |
| ACS-14 | Hopkinson Bar Calibration for shock transducers | (1) |
| M081B20 | Mounting bolt 1/4 "-28 to M6 x 0.75 | (2) |
PCB-301A12
