This website uses cookies, which are necessary for the technical operation of the site and which are always set. In order to further improve our offer and our website, we would like to set additional cookies in order to collect anonymized data for statistics and analyzes. However, these are only set with your consent. Further information on cookies can be found in our privacy policy.

Privacy policy Acceptdone
    PCB-301A10
    zoom_out_map

      PCB-301A10

    • ICP® calibration reference vibration sensor,
    • Measurement range 50 g,
    • Sensitivity 100 mV/g,
    • Frequency range: 0.5 … 10,000 Hz,
    • 1/4 "-28 internal thread above,
    • 1/4 "-28 internal thread below,
    • 10-32 female connector on the side
      • "
      basic data
      sensitivity (±2. 0%)100 mV/g10.2 mV/(m/s²)
      range±50 g pk ±490 m/s 2 pk
      frequency range (±5%)0.5 … 10,000 Hz
      Frequency range (± 10%)0.3 … 14,000 Hz
      frequency range (± 3 dB)0.2 … 20,000 Hz
      Resonance frequency≥ 35,000 Hz
      wide band resolution0.004 g RMS0.039 m/s² RMS[2]
      Linearity≤ 1%[1]
      transverse acceleration sensitivity≤ 3%
      conditions of use
      Overload limit±5. 000 g pk±49. 050 m/s² pk
      Temperature range-65… 250 ° F-54 … 121 ° C
      specifications
      power supply23 … 30 V DC
      Constant power supply2 … 20 mA
      output impedance< 100 Ω
      bias voltage11 … 17 V DC
      discharging charging time constant2.0 … 5.0 s
      Settling time < br(auf Bias-Spannung ±10 %)< 12.0 s
      spectral noise (10 Hz)65 µg / √ Hz638 (µm / s ²) / √ Hz[2]
      Spectral noise (100 Hz)20 µg / √ Hz196 (µm / s ²) / √ Hz[2]
      spectral noise (1,000 Hz)15 µg / √ Hz147 (µ m/s²) / √ Hz[2]
      physical properties
      size - height1 ½ in38.1 mm
      size - hex1 3 / 16 in30.2 mm
      Dimensions6.2 oz176 grams[2]
      sensor elementquartz
      geometry of the sensor element Shear principle
      housing material316 L (stainless steel)
      sealinghermetically sealed welded
      Electrical connection10-32-coaxial socket
      connection positionside
      mounting thread ( Mounting on Shaker)1/4 "-28 female
      mounting thread (Assembly of the DUT)1/4"-28 female
      notes
      [1]zero-based balancing line, determined using the method of least squares
      [2]typically
      [3]details: see PCBs Declaration of conformance PS023
      Accessories
      081A08mounting bolts (10-32 to 1/4 "28)2
      081 B 20mounting bolts, with shoulder(1/4 "28 1/4"-28)2
      ACS-1frequency response, traceable to NIST (10 Hz up to the upper 5% point)-1
      ACS-4 Low frequency calibration (phase and amplitude) of 0.5 … 10 Hz-1
      M081B20mounting bolts 1/4 "28 M6 x 0.752
      (M) metric montage
      PCB-301A10

      Specific References

      Download

      301A10_drawing.PDF

      Technical drawing

      Download (31.1k)

      301A10_manual.PDF

      Operating instructions

      Download (1.71M)

      301A10_specs.PDF

      Technical data sheet

      Download (59.48k)