PCB-052BQ010AC
- Shielded two-wire cable,
- 3 meters,
- 2-pin angle connector to BNC
| Connector/cable end 1 | |||
| Connector type | 2-pin angle connector in accordance with MIL-C-5015 | ||
| Contacts | Female | ||
| Connection method | Screw connection | ||
| Connection thread | 5/8-24 cap ring | ||
| Strain relief | Cast spout | ||
| Temperature range | -67... 250 ° F | 55... 121 ° C | |
| Size - diameter | 0.83 in | 21.08 mm | |
| Size - length | 1.16 in | 29,64 mm | |
| Size - height | 1.53 in | 38,86 mm | |
| Mass | 0.39 oz | 11.04 grams | |
| Connector/cable end 2 | |||
| Connector type | BNC connector | ||
| Connector (signal) | Male | ||
| Connection method | Bayonet | ||
| Temperature range | -85... 329 ° F | -65... 165 ° C | |
| impedance | 50 Ω | ||
| insulation resistance | 5,000 M? | ||
| housing material | Brass | ||
| surface | nickel | ||
| size - od | 0.57 in | 14 mm | |
| Size - length | 1.1 in | 28 mm | |
| mass | 0.51 oz | 14 grams | |
| cable | |||
| cable length | 10 ft | 3 m | |
| Type of cable | shielded two-core cable | ||
| vein running | twisted | ||
| temperature range | -58... 250 ° F | 50... 121 ° C | |
| resistance | < 0.01 ?/ft | < 33 ?/km | |
| capacity (head to head at 21 ° C) | 36 pF / ft | pF/m for 118 | |
| Inductance | 0.34 µH/ft | 1.12 µH/m | |
| maximumVoltage | 600 V | ||
| Diameter of the cable sheath (±0. 25 mm) | 0.25 in | 6.35 mm | [1] |
| Jacket material | Polyurethane | ||
| Color of the cable jacket | Black | ||
| Wire version | 19 fibers 32 AWG | ||
| Conductor material | Tinned copper | ||
| Conductor diameter (20 AWG) | 0.04 in | 1.02 mm | [1] |
| Shielding | Braided (at least 90% covered) | ||
| Shielding material | Tinned copper | ||
| By wire material | Tinned copper | ||
| Filling material | Aramid | ||
| Minimum bending radius | 2.5 in | 63.5 mm | |
| Mass | 0.67 oz/ft | 61.85 grams / m | [1] |
| Notes | |||
| [1] | Typically |
PCB-052BQ010AC
