PCB-003A03
connector/cable end 1 | |||
connector type | 10-32 coaxial plug | ||
Connector (signal) | male | ||
Connection method | coupling | ||
thread | cap 10-32 ring | ||
strain relief | Cast spout | ||
Temperature | -320 … 500 ° F | -196 … 260 ° C | |
size - od | 0.25 in | 6.4 mm | |
Size - length | 0.94 in | 24 mm | |
mass | 0.1 oz | 2 g | |
connector/cable end 2 | |||
Connector type | 10-32 coaxial plug | ||
Connector (signal) | male | ||
connection method | Screw connection | ||
Thread | cap 10-32 ring | ||
strain relief | moulded spout | ||
Temperature | -320 … 500 ° F | -196 … 260 ° C | |
size - od | 0.25 in | 6.4 mm | |
Size - length | 0.94 in | 24 mm | |
Mass | 0.1 oz | 2 grams | |
cable | |||
cable length | 3 ft | 90 cm | |
cable type | Low-noise coaxial cable | ||
temperature | -320 … 500 ° F | -196 … 260 ° C | |
train capacity | 75 lb | 330 N | [1] |
impedance (±2 Ω) | 50 Ω | ||
capacity (±2 pF/ft) | 30 pF / ft | pF/m for 90 | |
Insulation resistance (at 50 V, 20 ° C) | > 1 TΩ | ||
noise (pk-pk) | ≤ 3 mV | ||
diameter of the cable jacket | 0.079 in | 2.01 mm | [1] |
coat material | PTFE | ||
coat color | Blue | ||
Wire version | solid | ||
conductor material | nickel-plated steel with copper plating | ||
Conductor diameter (29 AWG) | 0.011 in | 0,279 mm | |
Wire insulation | virgin PTFE | ||
shielding | braided (at least 90% covered) | ||
Shielding material | nickel-plated wire | ||
Noise barrier materials (via the ladders) | liquid graphite | ||
Noise barrier materials (over isolation) | Graphite impregnated PTFE tape | ||
minimum bending radius | 1 in | 25.4 mm | |
Mass | 0.1 oz/ft | 9.5 gm/m | [1] |
notes | |||
[1] | typically |