PCB-034G05
| connector/cable end 1 | |||
| connector type | Male 4-pin | ||
| contacts | female | ||
| Connection method | coupling | ||
| Mount | 1/4 "-28 cap ring | ||
| strain relief | moulded spout | ||
| " Temperature range | -76 … 325 ° F | -60 … 162.7 ° C | |
| housing material | brass | ||
| size - Tempe endurchmesser | 0.30 in | 7.6 mm | |
| size - length | 1.0 in | 25 mm | |
| mass | 0.11 oz | 3.0 grams | |
| Connector/cable end 2 | |||
| cable termination | triple splitting on three coaxial cable | ||
| connector type | Three BNC connectors | ||
| Connector (signal) | male | ||
| connection method | bayonet | ||
| Strain relief | Cast spout | ||
| Temperature | -67 … 230 ° F | -55 … 110 ° C | |
| labels | ,X-axis, Y-axis, Z-axis | ||
| Size - length | 12 in | 30.5 cm | |
| cable | |||
| cable length | 5 ft | 1.5 m | |
| cable type | Four-wire shielded cable | ||
| core execution | not twisted | ||
| temperature range | -130 … 392 ° F | -90 …200 ° C | |
| Maximum tractive force | 20 lb | 90 N | [1] |
| capacity (head to head at 21 ° C) | 14 pF / ft | pF/m for 46 | |
| capacity (head on screen at 21 ° C) | 25 pF / ft | pF/m for 82 | |
| Maximum voltage (rms) | 160 V | ||
| noise level (peak to peak) | < 30 mV | ||
| diameter of the cable jacket | 0.077 in | 1.96 mm | [1] |
| materialthe cable sheath | FEP | ||
| color of the cable jacket | Blue | ||
| wire version | solid | ||
| Conductor material | copper Silberbeschichtetes | ||
| head diameter (34 AWG) | 0.006 in | 0.15 mm | [1] |
| wire insulation | Virgin PTFE | ||
| shielding | braided (at least 90% covered) | ||
| screen material | Silberbeschichteter wire | ||
| Screen diameter (each fibre 40 AWG) | 0.063 in | 1.60 mm | [1] |
| Noise barrier material | Graphite impregnated PTFE tape | ||
| Bending radius (minimum) | 1 in | 25.4 mm | |
| mass | 0.09 oz/ft | 8.31 gm/m | [1] |
| notes | |||
| [1] | Typically |
PCB-034G05
