PCB-356A61/NC
- Triaxial ICP® miniature vibration sensor,
- With built-in low-pass filter,.
- Measuring range 500 g
- Sensitivity 10 mV / g,.
- Frequency range 2... 4,000 Hz,
- Weight 4 grams.
- Integrated cable, length 1.5 m,
ending on 4-pin female connector. - Without extension cable
| Basic data | |||
| Sensitivity (± ≤5 %) | 10 mV / g | 1.02 mV/(m/s²) | |
| Measuring range | ±500 gPK | ±4.905 m/s²PK | |
| Frequency range (-5%) | 2... 4,000 Hz | ||
| Resonance frequency | ≥55.000 Hz | ||
| Edge steepness of the filter | 6 dB/octave | [1] | |
| Electrical filter corner frequency | 15,000 Hz | [1] | |
| Wide band resolution | 0.008 g RMS | 0.08 m/s² RMS | [1] |
| Linearity error | ≤1 % | [2] | |
| Transverse acceleration sensitivity | ≤5 % | ||
| Conditions of use | |||
| Overload limit (shock) | ±10.000 gPK | ±9≥ 100 MΩs²PK | |
| Temperature range (operation) | -65... 325 ° F | -54... 163 ° C | |
| Technical properties | |||
| Supply voltage | 18... 30 V DC | ||
| Constant power supply | 2... 20 mA | ||
| Output impedance | ≤200 Ω | ||
| Bias voltage | 7... 11 V DC | ||
| Discharge charge time constant | 0.3... 1,0 s | ||
| Settling time (on bias voltage ±10 %) | ?3, 0 s | ||
| Spectral noise (1 Hz) | 445 µg/√Hz | 4,365 (µm/s²)/√Hz | [1] |
| Spectral noise (10 Hz) | 135 µg/√Hz | 1,325 (µm/s²)/√Hz | [1] |
| Spectral noise (100 Hz) | 90 µg/√Hz | 883 (µm/s²)/√Hz | [1] |
| Spectral noise (1,000 Hz) | 80 µg/√Hz | 785 (µm/s²)/√Hz | [1] |
| Physical properties | |||
| Sensor element | Ceramic | ||
| Geometry of the sensor element | Shear principle | ||
| Housing material | Titanium | ||
| Sealing | Hermetically sealed welded | ||
| Size - height | 0.4 in | 10.2 mm | |
| Size - length | 0.4 in | 10.2 mm | |
| Size - width | 0.4 in | 10.2 mm | |
| Weight (without cable) | 0.14 oz | 4.0 grams | [1] |
| Electrical connection | Integrated cable | ||
| Cable outlet | On the side | ||
| Cable termination | 1/4 "-28 4-pin connector | ||
| Cable length | 5.0 ft | 1.5 m | |
| Cable type | Type 034, 4-conductor shielded cable | ||
| Mounting | Mounting bolts | ||
| Mounting thread | 5-40 female | ||
| Installation torque | 4... 5 in-lb | 45... 56 NCM | |
| Notes | |||
| [1] | Typically | ||
| [2] | Zero-balance just, determined using the method of least squares | ||
| [3] | Details: see PCBs Declaration of conformance PS023 | ||
| Included accessories | |||
| 080A | Adhesive mounting | -1 | |
| 080A109 | Mount wax | -1 | |
| 081A27 | Mounting bolts, 5-40 on 5-40 | -1 | |
| 081A90 | Mounting bolts, 10-32 on 5-40 | -1 | |
| ACS-1T | Frequency response for Triaxial accelerometer, traceable to NIST, 10 Hz up to the upper 5%-Frequenz | -1 | |
| M081A27 | Metric mounting bolts, 5-40 M3 x 0.50 | -1 | |
| (W) waterproof cable connection | |||
| Additional information | |||
| Special features | Built-in low-pass filter with low cut-off frequency < ul> |
PCB-356A61/NC
