PCB-TLD339A37/NC
zoom_out_map

PCB-TLD339A37/NC

  • Triaxial ICP® high temperature vibration sensor
  • Continuous operating temperature up to 180 ° C
  • Low temperature coefficient
  • With integrated low-pass filter
  • Measuring range 50 g
  • Sensitivity 100 mV / g
  • Frequency range 0.2 ... 7,000 Hz
  • 4-pin connection socket on the side
Specifications
Basic dataEnglish unitsSI units 
Sensitivity (± 10%) 100 mV/g 10,2 mV/(m/s²)
Measuring range ±50 g pk ±490,5 m/s² pk
Frequency range (± 5%) 0.3 ... 4,000 Hz
Frequency range (± 10%) 0.2 ... 7,000 Hz
Resonance frequency ≥35,000 Hz
Integrated filter Unipolar
Edge steepness of the filter 20 dB / decade
Corner frequency of the electrical filter > 15,000 Hz
Broadband resolution (1 ... 10,000 Hz) 0.002 g rms 0,019 µm/s² rms [2]
Phase response (± 5%) (21 ° C) 3 to 2000 Hz
Linearity error ≤1% [1]
Lateral acceleration sensitivity ≤5%
TEDS-Chip Integrated as standard
Conditions of use
Overload limit (shock) ±5.000 g pk ±49.000 m/s² pk
Temperature range -65 ... 356 ° F -54 ... 180 ° C [2]
Temperature coefficient of sensitivity See graph [2]
Stretch sensitivity (base area) 0.001 g / ml 0.0098 (m / s²) / ε [2]
Technical characteristics
Supply voltage 21… 30 V DC
Constant current supply 2… 4 mA [3]
Output impedance ≤200 Ω
Bias voltage 8 ... 14 V DC
Discharge time constant 2 … 6 s
Settling time (within ± 10% of the bias voltage) <30 s
Spectral noise (1 Hz) 210 µg/√Hz 2,060 (µm / s²) / √Hz [2]
Spectral noise (10 Hz) 40 µg/√Hz 392 (µm / s²) / √Hz [2]
Spectral noise (100 Hz) 20 µg/√Hz 196 (µm / s²) / √Hz [2]
Spectral noise (1,000 Hz) 12 µg/√Hz 118 (µm / s²) / √Hz [2]
Spectral noise (10,000 Hz) 10 µg/√Hz 98 (µm / s²) / √Hz [2]
Physical characteristics
Sensor element UHT-12™
Geometry of the sensor element Scherprinzip
Housing material titanium
seal Hermetically sealed
Size - height 0.55 in 14.0 mm
Size - length 0.80 in 20.3 mm
Size - width 0.55 in 14.0 mm
Dimensions 0,37 oz 10.5 grams [2]
Electrical connection ¼-28 4-Pin
Connection position Laterally
Mounting thread 5-40 female

Hints
[1] Zero-based best-fit line, determined using the least squares method
[2] Typically
[3] Constant current of up to 20 mA possible at up to 121 ° C
[4] Details: see PCB Declaration of Conformance PS023

included supply
080A109 Assembly wax (1)
080A145 Adhesive fastening (1)
080A90 Superglue (1)
081A27 Mounting bolts (5-40 to 5-40) (1)
ACS-1T Frequency response for triaxial transducers, traceable to NIST, 10 Hz up to the upper 5% frequency (1)
M081A27 Metric mounting stud, 5-40 to M3 x 0.50 (1)

Available options
(TLB) TEDS LMS International - format for the automotive industry
PCB-TLD339A37/NC

Specific References

Download

TLD339A37_manual.pdf

TLD339A37_manual.pdf

Download (1.89M)

TLD339A37_specs.pdf

TLD339A37_specs.pdf

Download (31.31k)

TLD339A37_drawing.pdf

TLD339A37_drawing.pdf

Download (104.48k)