PCB-(M)102B06
| basic data | |||
| measuring range (±5 V output range) | 500 psi | 3,450 kPa | |
| usable range (output range ±10 V) | 1,000 psi | 6.895 kPa | [1] |
| sensitivity (±10%) | 10 mV / psi | 1.45 mV / kPa | |
| maximum static pressure | 10,000 psi | 68.950 kPa | |
| Resolution | 2 mpsi | 0.014 kPa | [2] |
| resonance frequency | ≥ 500, 000 Hz | ||
| rise time (reflected pressure) | ≤ 1.0 µs | ||
| lower limiting frequency (-5%) | 0.01 Hz | ||
| linearity | ≤1.0% FS | [3] | |
| conditions | |||
| acceleration sensitivity | ≤ 0.002 psi/g | ≤ 0,0014 kPa/(m/s²) | |
| temperature range (operation) | -100 … 275 ° F | -73 … 135 ° C | |
| Temperature coefficient of sensitivity | ≤ 0.03 %/°F | ≤ 0,054 %/°C | [2] |
| Maximum temperature shock(for fraction of a second) | 3,000 ° F | 1,650 ° C | |
| Maximum shock resistance | 20,000 g pk | 196,000 m/s² pk | |
| Technical characteristics | |||
| Output polarity (positive pressure) | positive | ||
| Discharging charging time constant (at room temperature) | ≥ 50 s | ||
| supply | 20 … 30 V DC | ||
| Constant power supply | 2 … 20 mA | ||
| output impedance | < 100Ω | ||
| Bias voltage | 8 … 14 V DC | ||
| electrical insulation | 100 MΩ | ||
| -physical Properties | |||
| geometry of the sensor element | compression principle | ||
| sensor element | quartz | ||
| parts usematerial | stainless steel | ||
| membrane | INVAR | ||
| sealed | sealeddensely welded | ||
| electrical connection | 10-32-coaxial socket | ||
| mass | 0.41 oz | 11.6 grams | |
| Notes | |||
| [1] | for output range supply voltage up to 10 V must be at least 24 V DC. At low bias voltage of the sensor, no negative output range is usable up to-10 V. | ||
| [2] | typically | ||
| [3] | zero-based balancing line, determined using the method of least squares | ||
| [4] | details: see PCBs Declaration of conformance PS023 | ||
| equipment | |||
| 065A03 | sealing ring, 0.435 "outside x 0,377" x 0.030 "high brass | 3 | |
| (M) metric mounting | |||
| equipment | |||
| 065A40 | sealing ring, 0.435" outside x 0,397 "x 0.030" high brass | 3 | |
| (S) stainless steel diaphragm | |||
PCB-(M)102B06
