PCB-(M)102B03
| basic data | |||
| measuring range (±5 V output range) | 10,000 psi | 69,000 kPa | |
| sensitivity (±0, 03 mV / psi) | 0.5 mV / psi | 0.07 mV /. kPa | |
| maximum pressure | 15,000 psi | kPa 103.420 | |
| resolution | 40 mpsi | 0.28 kPa | [1] |
| Resonance frequency | ≥ 500, 000 Hz | ||
| rise time (reflected pressure) | ≤ 1.0 µs | ||
| lower limiting frequency (-5%) | 0.0005 Hz | ||
| linearity | ≤1.0% FS | [2] | |
| conditions | |||
| acceleration sensitivity | ≤ 0.002 psi/g | ≤ 0,0014 kPa/(m/s²) | |
| temperature range (operation) | -100 … 275 ° F | -73 … 135 ° C | |
| Temperature coefficient of sensitivity | ≤ 0.03 %/°F | ≤ 0,054 %/°C | [1] |
| maximum shock (for fraction of a second) | 3,000 ° F | 1.649 ° C | |
| Maximum shock resistance | 20,000g pk | 196,000 m/s² pk | |
| technical | |||
| output polarity ( positive pressure) | positive | ||
| discharging charging time constant (at room temperature) | ≥ 1,000 s | ||
| supply | 20 … 30 V DC | ||
| Constant power supply | 2 … 20 mA | ||
| output impedance | < 100Ω | ||
| Bias voltage | 8 … 14 V DC | ||
| Electrical insulation | 100 MΩ | ||
| physical properties | |||
| geometry of the sensor element | compression principle | ||
| Sensor element | quartz | ||
| housing material | stainless steel | ||
| membrane | INVAR | ||
| Sealing | hermetically sealed welded | ||
| Electrical connection | 10-32-coaxial socket | ||
| mass | 0.41 oz | 11.6 grams | |
| notes | |||
| [1] | Typically | ||
| [2] | zero-based balancing line, determined using the method of least squares | ||
| [3] | details: see PCB Declaration of conformance PS023 | ||
| equipment | |||
| 065A03 | sealing ring, 0.435 "outside x 0,377" x 0.030 "high brass | 3 | |
| (M) metric mounting | |||
| equipment | |||
| 065A40 | sealing ring, 0.435 "outside x 0,397" x 0.030 "high brass | 3 | |
| (S) stainless steel diaphragm | |||
PCB-(M)102B03
