PCB-HT426E01
| basic data | |||
| Nominal diameter of microphone | 1/2 " | ||
| reinforcement (rel. 1,000 Hz) | -0,06 dB | [1] [2] | |
| Frequency range (±0. 1 dB) (rel. 1,000 Hz) | 6.3 … 126,000 Hz | [4] [1] | |
| frequency range (-3 dB) (rel. 1,000 Hz) | < 1.58 Hz | [4] [1] | |
| Frequency range (±0. 1 dB) (rel. 1,000 Hz) | 10 … 126,000 Hz | [5] [1] | |
| frequency range with phase deviation-1 … 1 ° | 63 … 40,000 Hz | [1] | |
| frequency range with phase deviation-1 … 10 ° | 10 … 63 Hz | [1] | |
| electrical noise (at 22 ° C) (A-weighted) | ≤ 4.9 microvolts | [1] | |
| electrical noise (at 22 ° C) (A-weighted) | 3.1 MV | [1] [2] | |
| electrical noise (at 22 ° C) ( unweighted, 20 … 20,000 Hz) | ≤ 13.4 µV | [1] | |
| electrical noise (at 22 ° C) (unweighted, 20 … 20,000 Hz) | 9.3 µV | [1] [2] | |
| Electrical noise (at 120 ° C) (A-weighted) | ≤ 9.6 µV | [1] | |
| electrical noise (at 120 ° C) (A-weighted) | 6.4 µV | [1] [2] | |
| Electrical noise (at 120 ° C) (unweighted, 20 … 20,000 Hz) | ≤ 37.1 µV | [1] | |
| electrical noise (at 120 ° C) (unweighted, 20 … 20,000 Hz) | 24.7 µV | [1] [2] | |
| distortion (input 3 V rms at 1,000 Hz) | ≤ 70 dB | [1] | |
| rate of change of the output | 2 V / µS | [2] | |
| TEDS Chip | integrated by default | [3] | |
| conditions | |||
| temperature range (operation) | -40 … 248 ° F | -40 … 120 ° C | |
| influence of temperature | ±0. 1 dB | [6] | |
| air humidity (non-condensing) | 0 … 95% RH | ||
| influence by humidity | ±0, 1 dB | [6] | |
| specifications | |||
| power supply | 20 … 32 V DC | ||
| Constant power supply | 2 … 10 mA | ||
| impedance (input) | 9.4 G Ω | [2] | |
| capacity (input) | 0.06 pF | [2] | |
| Bias voltage | 10 … 14 V DC | ||
| impedance (output) | < 55 Ω | ||
| Output range (maximum) | ±7 V pk | ||
| physical properties | |||
| parts usematerial | stainless steel | ||
| size - diameter | 0.5 in | 13 mm | |
| size - length | 3.5 in | 89 mm | |
| Mass | 1.45 oz | 41 g | [2] |
| electrical connection | BNC Jack | ||
| thread f for microphone | 0,461 "-60 UNS | 11,7 mm - 60 UNS | |
| notes | |||
| [1] | measured with a reference microphone with12 pF | ||
| [2] | typically | ||
| [3] | TEDS memory in accordance with IEEE PP1451. 4 | ||
| [4] | at 22 ° C | ||
| [5] | at 120 ° C | ||
| [6] | maximum | ||
| [7] | details: see PCB Declaration of Conformance PS065 | ||
| Accessories | |||
| ERC-16 | calibration of a microphone preamplifier | -1 |
PCB-HT426E01
