PCB-101A04
General purpose ICP® pressure sensor, 1000 psi, 5 mV/psi, 3/8-24 mtg thd, ground isolated
- Measurement Range: 1000 psi (6895 kPa)
- Sensitivity: (±0.5mV/psi)5.0 mV/psi (0.73 mV/kPa)
- Low Frequency Response: (-5%)0.005 Hz
- Resonant Frequency: >=400 kHz (>=400 kHz)
- Electrical Connector: 10-32 Coaxial Jack
- Weight: 0.44 oz (12.5 gm)
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
[3] See PCB Declaration of Conformance PS023 for details.
English: | SI: | ||
---|---|---|---|
Performance | |||
Measurement Range (for ±5V output) | 1000 psi | 6895 kPa | |
Useful Overrange (for ± 10V output) | 2000 psi | 13790 kPa | [2] |
Sensitivity (±0.5 mV/psi) | 5.0 mV/psi | 0.73 mV/kPa | |
Maximum Pressure (static) | 10000 psi | 69000 kPa | |
Resolution | 0.020 psi | 0.138 kPa | |
Resonant Frequency | ≥400 kHz | ≥400 kHz | |
Rise Time (Reflected) | ≤1.5 µ sec | ≤1.5 µ sec | |
Low Frequency Response (-5 %) | 0.005 Hz | 0.005 Hz | |
Non-Linearity | ≤2.0 % FS | ≤2.0 % FS | [1] |
Environmental | |||
Acceleration Sensitivity | ≤0.002 psi/g | ≤0.0014 kPa/(m/s²) | |
Temperature Range (Operating) | -100 to +275 °F | -73 to +135 °C | |
Temperature Coefficient of Sensitivity | ≤0.03 %/°F | ≤0.054 %/°C | |
Maximum Flash Temperature | 3000 °F | 1650 °C | |
Maximum Shock | 20000 g pk | 196000 m/s² pk | |
Electrical | |||
Output Polarity (Positive Pressure) | Positive | Positive | |
Discharge Time Constant (at room temp) | ≥100 sec | ≥100 sec | |
Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | ≤100 Ohm | ≤100 Ohm | |
Output Bias Voltage | 8 to 14 VDC | 8 to 14 VDC | |
Electrical Isolation | 100000000 Ohm | 100000000 Ohm | |
Physical | |||
Sensing Geometry | Compression | Compression | |
Sensing Element | Quartz | Quartz | |
Housing Material | Stainless Steel | Stainless Steel | |
Diaphragm | Invar | Invar | |
Sealing | Welded Hermetic | Welded Hermetic | |
Electrical Connector | 10-32 Coaxial Jack | 10-32 Coaxial Jack | |
Weight | 0.44 oz | 12.5 gm |
* All specifications are at room temperature unless otherwise specified.
Accessories
Supplied | ||
065A03 | Seal ring, 0.435" OD x 0.377" ID x 0.030" thk, brass (for Series 101 and 102, and Model 061A01) | 3 |
Optional Versions
Accessories: | |||
---|---|---|---|
Supplied | 065A40 | Seal ring 0.435" OD x 0.397" ID x 0.030" thk brass | 3 |
(S) Stainless Steel Diaphragm
English | SI | |
---|---|---|
Diaphragm | 316L Stainless Steel | |
Diaphragm | 316L Stainless Steel |