PCB-357C10

PCB-357C10

  • Miniature vibration sensor with charge output,
  • Mass 0.45 grams,
  • Continuous use temperature to 177 ° C,
  • Measuring range 500 g
  • Sensitivity 1.7 pC/g,
  • Upper frequency limit 10,000 Hz,
  • 3 56-connector side,
  • Including connection cable, length 3 m,
    ending on 10-32 plug
  • ,
    basic data
    sensitivity (±20%)1.7 pC/g0.17 pC/(m/s²)
    range±500 g pk ±4. 905 m/s 2 pk
    frequency range (+ 5%)10,000 Hz[3]
    Frequency range (+ 10%)13,000 Hz[3]
    resonance frequency≥ 50,000 Hz
    linearity≤ 1%[1]
    Transverse acceleration sensitivity≤ 5%[4]
    conditions
    Overload limit (shock)±5. 000 g PK±49. 050 m/s² pk
    Temperature range-100 … 350 ° F-73 … 177 ° C
    strain sensitivity (base area)≤ 0.10 g/µε≤ 1.0 (m/s²)/µε[2]
    technical characteristics
    capacity310 pF[2]
    insulation resistance (at 21 ° C)> 10,000 M Ω
    electrical insulation (base) ≥100 MΩ
    Physical properties
    sensor elementceramic
    geometry of the sensor elementshear principle
    Housing materialanodized aluminum
    waterproofingepoxy resin
    size - height0.14 in3.6 mm
    size - length0.45 in11.4 mm
    size - width0.25 in6.4 mm
    Mass0.016 oz0.45 grams[2]
    electrical connection3-56 coaxial plug
    connection position Side
    attachmentbonding
    notes
    [1]zero-based balancing line, determined with the method of the smallest Squares
    [2]typically
    [3]the lower cut-off frequency depends on the used signal conditioning electronics.
    [4]transverse acceleration sensitivity typically ≤ 3%
    equipment
    030A10coaxial cable, 3 m, 3-56-plug to 10-32-1
    039A27transfer tool for the models 352A21, 352 C-22, 352A25, 357A09, 357 C-10-1
    080A109mounting wax-1
    ACS-1frequency response, traceable on NIST (10 Hz up to the upper 5% point)-1
    (P) positive output voltage

    30 other articles of the same category: