PCB-(M)207C

PCB-(M)207C

  • ICP® power measurement washer,
  • Measuring range 445 kN,
  • Sensitivity 11,2 µV / kN,
  • Frequency range 0.0003 … 35,000 Hz,
  • 10-32 female connector on the side
  • basic data
    sensitivity (±15%)0.05 mV / lb11.24 mV / kN 
     
    measuring range (pressure)100,000 lb444.8 kN 
     
    Maximum permissible static load (force)110,000 lb489,3 kN 
     
    wide band resolution2.0 lb RMS8.9 N RMS[1]
     
    Lower limiting frequency (-5%)0.0003 Hz [2]
     
    upper frequency limit35,000 Hz [4]
     
    linearity error≤ 1% FS [3]
    conditions
    temperature range-65 … 250 ° F-54 … 121 ° C 
     
    temperature coefficient Temperature coefficient of sensitivity≤ 0.02 %/°F≤0,216 %/°C 
    technical properties
    discharge charge time constant (at room temperature) ≥ 2,000 s  
     
    Supply20 … 30 V DC  
     
    constant power supply2… 20 mA  
     
    output impedance≤100 Ω  
     
    Bias voltage8 … 14 V DC   
     
    Spectral noise (1 Hz)0,0524 lb / √Hz0.23 N / √Hz[1]
     
    spectral noise (10 Hz)0,0230 lb / √Hz0.10 N / √Hz[1]
     
    Spectral noise (100 Hz)0,00854 lb / √Hz0,0381 N / √Hz[1]
     
    spectral noise (1,000 Hz)0,00214 lb / √Hz0,00955 N / √Hz[1]
     
    (Pressure) output polaritypositive  
    physical properties
    preload33.750 lb150,13 kN 
     
    Stiffness131 lb/µin23 kN/µm[1]
     
    Size - diameter2,950 in74.9 mm 
     
    size - height0,670 in17,02 mm 
     
    Gr öße - inner diameter (hole diameter)1.610 in40 mm 
     
    Size - diameter of the measuring surface2,660 in67.6 mm 
     
    mass11,57 oz328 grams 
     
    housing materialStainless steel  
     
    sealinghermetically sealed  
     
    electrical connection10-32-coaxial socket  
     
    Connection positionside  
    notes
    [1]typically  
     
    [2]based on the Calculated discharge charge time constant  
     
    [3]zero-based balancing line, determined using the method of least squares  
     
    [4]Accepted value determined on the basis of solid state Dynamics calculations  
     
    [5]details: see PCBs Declaration of conformance PS023  
    included Accessories
    080A82grease-1 
     
    081A17mounting bolts, 1 1/8 to 12 x 2,280 ", BeCu-1 
     
    082 B 07Plain washer (for the 207C models and 217B)-1 
     
    083 B 07mounting sleeve (for the 207 C models and 217 B)-1 
    (M) metric mounting
    equipment   
     
    M081A17mounting bolts, M30 x 2.00 x 2,280 ", BeCu-1 
     
    M083B07mounting sleeve-1 
    (N) ) Negative output polarity
        
    (W) waterproof cable connection
    electrical connectionsealed cable connection  
     
    Cable exitside  

    29 other articles of the same category: