PCB-201B03

PCB-201B03

  • ICP® power measurement washer,
  • Measuring range 2.224 N,
  • Sensitivity 2,2 mV / N,
  • Frequency range 0.002 … 90,000 Hz,
  • 10-32 female connector on the side
  •  

    basic data
    sensitivity (±15%)10 mV / lb2.248 mV / kN 
     
    measuring range (pressure)500 lb2,224 kN 
     
    Maximum permissible static load (force)3,000 lb13,34 kN 
     
    wide band resolution0.01 lb RMS0,04448 N RMS[3]
     
    Lower limiting frequency (-5%)0.002 Hz [2]
     
    upper cut-off frequency90,000 Hz [4]
     
    linearity error≤ 1% FS [1]
    conditions
    temperature range-65 … 250 ° F-54 … 121 ° C 
     
    temperature coefficient Temperature coefficient of sensitivity≤ 0.03 %/°F≤ 0,054 %/°C 
    technical properties
    discharge charge time constant (at room temperature)≥400 s  
     
    Supply20 … 30 V DC  
     
    constant power supplyOn the side  
    Notes
    [1]zero-based balancing line, determined using the method of least squares  
     
    [2]on the basis of the Calculated discharge charge time constant  
     
    [3]typically  
     
    [4]assume that value determined on the basis of Festkö body dynamics calculations  
     
    [5]details: see PCBs Declaration of conformance PS023  
    equipment
    080A82Grease-1 
     
    081A11mounting bolts, 10-32 x 0,730 ", BeCu-1 
     
    082 B 01washer-1 
     
    083 B 01Mounting sleeve-1 
     
    M081A11mounting bolt, M5 x 0.8 x 0,730 ", BeCu-1 
     
    M083B01mounting sleeve-1 
    (S) negative output polarity
        
    (W) waterproof cable
    wiringsealed cable connection  
     
    Cable outletOn the side  

    29 other articles of the same category: