PCB-EX(M)629A11A/006NF

PCB-EX(M)629A11A/006NF

  • Triaxial industrial ICP® vibration sensor
    for routing-based machine condition monitoring,
  • with ATEX / CSA approval,
  • with bore hole,
  • measuring area 50 g,
  • Sensitivity 100 mV/g,
  • frequency range 0.8 … 8,000 Hz,
  • frequency response calibration,
  • integrated spiral connection cable, length 1.8 metres,
    ending to three BNC < br(Alternativen auf Anfrage)
  • basic data
    measuring range±50 g±490 m / s²
    frequency range (±5%)144 … 120,000 cpm2.4 … 2.000 Hz[3]
    frequency range (± 10%)102 … 300,000 cpm1.7 … 5,000 Hz
    frequency range (± 3 dB)48 … 480,000 cpm0.8 … 8,000 Hz
    Resonance frequency1.200 kcpm20,000 Hz[1]
    wide band resolution (1 … 10,000 Hz)100 µg981 µm / s ²[1 ]
    Linearity≤1%[2]
    transverse acceleration sensitivity≤ 5%
    Conditions of use
    Overload limit (shock)49,050 m/s² pkpk 5,000 g
    temperature range-65 … 250 ° F-54 … 121 ° C
    Protection classIP68
    technical characteristics
    settling time (on area within ±1% of the bias voltage)≤ 3.0 s
    Discharging charging time constant≥ 0.2 s
    power18 … 28 V DC
    Constant power supply2 … 20 mA
    output impedance< 100 Ω
    Bias voltage8 … 12 V DC
    spectral noise (10 Hz)7.0 µg / √ Hz68.7 (µm / s ²) / √ Hz[1]
    spectral noise (100 Hz)2.8 µg / √ Hz27.5 (µm / s ²) / √ Hz[1]
    spectral noise (1,000 Hz)1.0 µg /. √ Hz9.8 (µm / s ²) / √ Hz[1]
    electrical protectionRFI/ESD
    electrical insulation≥ 100 MΩ
    Physical properties
    size - length1.5 in38.1 mm
    size - width1.5 in38.1 mm
    Gr & ouml; ße - height0.82 in20.8 mm
    mass4.9 oz139 grams
    mounting screw¼-28-male[4]
    Assembly torque2 … 5 ft-lb2.7 … 6.8 Nm
    sensor elementceramic
    Geometry of the sensor elementShear principle
    Housing materialstainless steel
    sealinghermetically sealed welded
    Electrical connectionpotted integrated cable
    Cable outlettop
    cable length10 ft3.0 m
    cable terminationBNC connector (alternatives on) Request)
    cable typepolyurethane[5]
    notes
    [1]typically
    [2]zero-based balancing line, determined using the method of least squares
    [3]the upper cut-off frequency tolerance: ±10%
    [4]no equivalent in SI units
    [5] 4-conductor shielded cable with twisted wire
    [6]details: see PCBs Declaration of conformance PS023
    Accessories
    081A56mounting screw ¼-28 x 0.75 "-1
    ICS-1frequency response for uniaxial sensors from 600 cpm (10 Hz) up to the upper 5% frequency-1
    (LB) low bias voltage
    voltage12 … 18V
    measuring range±35 g±343 m /
    (M) metric mounting

    30 other articles of the same category: