This website uses cookies, which are necessary for the technical operation of the site and which are always set. In order to further improve our offer and our website, we would like to set additional cookies in order to collect anonymized data for statistics and analyzes. However, these are only set with your consent. Further information on cookies can be found in our privacy policy.

Privacy policy Acceptdone
    PCB-3713E11200G
    zoom_out_map

      PCB-3713E11200G

    • Triaxial MEMS accelerometer,
    • Suitable for measuring static accelerations,
    • Measuring range 200 g
    • Sensitivity 10 mV / g,
    • Typical frequency range 0 … 3,000 Hz,
    • Supply voltage 6 … 30 V DC,
    • 9-pin female connector on the side
      • basic data
      sensitivity (±3%)10 mV / g1 mV/(m/s²)[1]
       
      measuring range±200 g pk±1. 962, 0 m/s 2 pk 
       
      Frequency range (± 3 dB)0 … 3,000 Hz [2]
       
      frequency range (± 3 dB)0 … 1500 Hz [5]
       
      Phase error< 10 °  
       
      wide band resolution (0,5 … 100 Hz)[2]0.03 m/s² rmsrms 3 mg
       
      Linearity error≤1% [3] [4]
       
      transverse acceleration sensitivity≤5%  
      conditions of use
      Overload limit (shock)±5. 000 g pk±49. 050 m / pk 
       
      Temperature range (operation)-65 … 250 ° F-54 … 121 ° C 
       
      temperature range (storage)-65 … 250 ° F-54 … 121 ° C 
       
      Temperature coefficient of sensitivity±3% [6]
       
      temperature coefficientzero±2% FSO [6] [3]
       
      strain sensitivity (footprint)0.001 g/µε0.01 (m/s²)/µε[2]
       
      Magnetic sensitivity100µg/Gs/9.8 (m/s²) / T[2]
      technical specifications
      power supply6 … 30 V DC  
       
      Power? 30 mA  
       
      output impedance? 120 ?  
       
      Spannungsoffset±80 mV DC [7]
       
      spectral noise (1 … 100 Hz)400 µg / √Hz3,924 (µm / s ²) / √Hz[2]
       
      electrical insulation (base)>100 MΩ  
      physical properties
      housing materialtitanium  
       
      Sealinghermetically sealed  
       
      size - length0.85 in21.6 mm 
       
      Size - width0.85in21.6 mm 
       
      size - height0.85 in21.6 mm 
       
      weight0.8 oz22.7 grams 
       
      Electrical connector9-Pin  
       
      Connectionon the side  
       
      mounting thread10-32 female  
      notes
      [1]measured @ 100 Hz  
       
      [2]typically  
       
      [3]FSO = "Full Scale Output": maximum output (4 V measuring range ( DC).  
       
      [4]zero-based balancing line, determined using the method of least squares  
       
      [5]guaranteed; through supplied with Calibration certificate is  
       
      [6]-54 … 121 ° C, reference 24 ° C  
       
      [7]offset at 3 meters cable length (type 037)  
       
      [8]details: see PCB Declarationof conformance PS027  
      equipment
      080A12adhesive mounting-1 
       
      081 B 05Mounting bolts, 10-32 on 10-32-1 
       
      M081B05mounting bolts, 10-32 to M6 x 0.75-1 
       
      ACS-145 Tcalibration of amplitude and phase response from 2 Hz to the upper ±3dB point (1,500 Hz)-1 
      PCB-3713E11200G

      Specific References

      Download

      3713E11200G_drawing.PDF

      Technical drawing

      Download (1.09M)

      3713E11200G_manual.PDF

      Operating instructions

      Download (1.39M)

      3713E11200G_specs.PDF

      Technical data sheet

      Download (81.5k)