PCB-(M)355B33
    zoom_out_map

      PCB-(M)355B33

    • ICP® vibration sensor,
    • With through hole,
    • Masseisoliert,
    • Measurement range 50 g,
    • Sensitivity 100 mV/g,
    • Frequency range 2 … 5,000 Hz,
    • 10-32 female connector on the side
    •  

      basic data
      sensitivity (±10%)10.2 mV/(m/s²) 
       
      range±50 g pk ±490 m/s 2 pk 
       
      frequency range (±5%)2 … 5,000 Hz  
       
      Frequency range (± 10%)1 … 10,000 Hz  
       
      frequency range (± 3 dB)0,5 … 12,000 Hz  
       
      Resonance frequency≥25,000 Hz  
       
      wide band resolution0.0005 g RMS0.005 m/s² RMS[1]
       
      Linearity≤1% [3]
       
      transverse acceleration sensitivity≤5% [2]
      conditions of use
      Overload limit (shock)±5. 000 g pk±49. 050 m/s² pk 
       
      Temperature range (operation)-65 … 250 ° F-54 … 121 ° C 
      specifications
      power supply22 … 30 V DC  
       
      constant power supply2 … 20 mA  
       
      output impedance≤100 Ω  
       
      Bias voltage11 … 16 V DC  
       
      discharging charging time constant0.5 … 2.0 s  
       
      Settling time < br(auf Bias-Spannung ±10 %)< 20 s  
       
      spectral noise (1 Hz)240 µg / √Hz2,350 (µm / s ²) / √Hz[1]
       
      spectral noise (10 Hz)65 µg / √Hz640 (µm / s ²) / √Hz[1]
       
      spectral noise (100 Hz)15 µg /. ? Hz150 (µm / s ²) / √Hz[1]
       
      spectral noise (1,000 Hz)5 µg / √Hz50 (µm / s ²) / √Hz[1]
       
      Electrical insulation (base)≥100 MΩ  
      physical properties
      size - height0.40 in10.2 mm 
       
      size - length0.70 in17.8 mm 
       
      size - width0.63 in15.9 mm 
       
      mass0.39 oz11 g[1]
       
      Sensor elementquartz  
       
      geometry of the sensor elementshear principle  
       
      housing materialtitanium  
       
      Sealinghermetically sealed  
       
      electrical connection10-32-coaxial socket  
       
      Connecting positionside  
       
      mountinghole  
      notes
      [1]typically  
       
      [2]transverse acceleration sensitivity typically ≤ 3%  
       
      [3]zero-based balancing line, determined using the method of least squares  
       
      [4]details: see PCBs Declaration of conformance PS023  
      equipment
      039A22Allen wrench, 7/64 "Allen-1 
       
      080A109mounting wax-1 
       
      081 B 45insulated mounting screw, 6-32 thread x 5/8 "long (for the model 355 B-02)-1 
       
      ACS-1frequency response, traceable to NIST (10 Hz up to the upper 5% point)-1 
      (M) metric Assembly
      equipment   
       
      M039A22Allen wrench for use with thread M3-1 
       
      M081B45metric mounting screw-1 
      (T) TEDS memory in accordance with IEEE PP1451. 4
      supply24 … 30 V DC   
       
      Bias voltage11.7 … 17 V DC  
      PCB-(M)355B33

      Specific References

      Download

      355B33_drawing_1.PDF

      Technical drawing 1

      Download (31.57k)

      355B33_drawing_2.PDF

      Technical drawing 2

      Download (49.79k)

      355B33_manual.PDF

      Operating instructions

      Download (1.71M)

      355B33_specs.PDF

      Technical data sheet

      Download (80.91k)