PCB-(M)623C60

PCB-(M)623C60

  • Industrial ICP® vibration sensor,
  • Measuring range 500 g
  • Sensitivity 10 mV / g,
  • Frequency range 0.8 … 15,000 Hz,
  • Frequency response calibration,
  • Integrated armored cable, length 3 m,
    ending on cut end
  •  

    basic data
    sensitivity (±5%)10 mV / g1.0 mV/(m/s²)[6]
     
    measuring range≤500 Ω±4. 905 m/s 2 
     
    Frequency range (±5%)144 … 480,000 cpm2.4 … 8,000 Hz[1]
     
    frequency range (± 10%)102 … 600,000 cpm1.7 … 10,000 Hz 
     
    frequency range (± 3 dB)48 … 900,000 cpm0.8 … 15,000 Hz 
     
    resonance frequency2,400 kcpm40,000 Hz[5]
     
    wide band resolution300 µg2.943 µm / s ²[5]
     
    linearity≤1% [2]
     
    Transverse acceleration sensitivity≤5%  
    conditions of use
    Overload limit (shock)5,000 g PK49,050 m/s² pk 
     
    temperature range-65 … 250 ° F-54 … 121 ° C 
     
    Protection classIP68  
    technical Properties
    settling time (on bias voltage ± 1%)≤ 3.0 s  
     
    discharging charging time constant≤ 0.2 s  
     
    Supply voltage18 … 28 V DC  
     
    constant power supply2 … 20 mA  
     
    Output impedance< 100Ω  
     
    Bias voltage8 … 12 V DC  
     
    spectral noise (10 Hz)12 µg / √Hz117 ( µm / s ²) / √ Hz[5]
     
    spectral noise (100 Hz)4.5 µg / √Hz44 (µm / s ²) / √Hz[5]
     
    spectral noise ( 1,000 Hz)2.7 µg / √Hz26.5 (µm / s ²) / √Hz[5]
     
    electrical protectionRFI/ESD  
     
    electrical insulation (go be)>100 MΩ  
    physical properties
    size - Allen11/16 in17.5 mm 
     
    Size - height4.4 in112 mm 
     
    dimensions (without cable)1.80 oz51 grams 
     
    mounting thread1/4 "-28 threadedno equivalent[3]
     
    Assembly torque2 … 5 ft-lb2.7 … 6.8 Nm 
     
    sensor elementceramics"  
     
    Geometry of the sensor elementshear principle  
     
    housing materialstainless steel  
     
    Sealinghermetically sealed welded  
     
    Electrical connectionintegrated armoured cable  
     
    cable outlettop  
     
    cable10 FT3.0 m 
     
    cable typepolyurethane [4]
    notes
    [1]the upper cut-off frequency tolerance: ±10%  
     
    [2]zero-based balancing line, determined using the method of least squares  
     
    [3]noEquivalent in SI units  
     
    [4]two-core cable with stainless steel reinforcement  
     
    [5]typically  
     
    [6]conversion factor 1 g = 9.81 m/s²  
     
    [7]details: see PCBs Declaration of conformance PS023  
    included Accessories
    081A40mounting bolts with 1/4 "-28 thread-1 
     
    ICS-1frequency response for uniaxial sensors from 10 Hz up to the upper 5% frequency-1 
    (M) metric mounting
    equipment   
     
    M081A61metric mounting bolts with M6 thread-1 
    (LB) low bias voltage
    Bias voltage6 … 8 V DC  
     
    Power12 … 28 V DC  
     
    measuring range±350 g±3. 434 m/s² 

    9 other articles of the same category: