PCB-(M)642A01
    zoom_out_map

      PCB-(M)642A01

    • Vibration transmitter with power output according to
      the peak value of vibration speed,
    • measuring range 0 … 25.4 mm / s,
    • output range 4 … 20 mA,
    • frequency range 3 … 1,000 Hz,
    • 2 Pin connector side, freely adjustable
    • "
      basic data
      range0,0 … 1.0 in / s pk0.0 … 25.4 mm / s pk[1]"
      Output area4 … 20 mA
      frequency range (± 10%)180 … 60,000 cpm3 … 1,000 Hz[2] [3]
      Wide band resolution0.005 in / s pk0.13 mm / s pk[4]
      Linearity error≤1%
      conditions of use
      temperature range-40 … 185 ° F-40 … 85 ° C
      technical Properties
      power12 … 30 V DC
      settling time (area within ±2% of full scale)<15 s
      electrical insulation (housing)≥ 100 MΩ
      physical properties
      size - hex7/8 in22.2 mm
      Size - height1.41 in35.8 mm
      weight3.8 oz108 grams
      mounting thread¾-16 female thread
      Assembly torque3 … 5 ft-lb4 … 7 Nm
      sensor elementceramic
      Geometry of the sensor elementshear principle
      housing materialstainless steel
      Sealinghermetically sealed welded
      electrical connection2-pin connector (MIL-C-5015)
      connection position Side
      pin assigNment (PIN A)output signal 4 … 20 mA positive
      pin assigNment (PIN B)output signal 4 … 20 mA negative
      notes
      [1]conversion factor 1 in / sec = 0.0254 m/sec.
      [2]1 Hz 60 = cpm ("Cycles Per Minute": rpm).
      [3]frequencies below 5 Hz, the output signal fluctuates.
      [4]typical value
      [5]details: see PCB Declaration of Conformance PS039 and PS053
      equipment
      080A162mounting bolt ¾-16 on 1/4 " 28-1
      ICS-4frequency response cpm for uniaxial sensors from 0 (0 Hz) up to the upper 10% frequency of vibration transmitter-1
      (EX) with ATEX approval
      Approval for use in potentially explosive atmospheresDIV II, CL I, GRPS A-D, ExnL, AExnA, IIC T4
      approval for use in potentially explosive atmospheresEEx ia IIC T4,-40 ° C ≤ Ta ≤ 80 ° C, II 1 G
      Approval for use in potentially explosive atmospheresEEx nL IIC T4,-40 ° C ≤ Ta ≤ 80 ° C, II 3 G
      approval for potentially explosive atmospheresDIV I, CL I, II, III, GRPS A-G, ExIA,.AExia, IIC T4
      (RV) raw signal output≥ 100 MΩ/g (±20%)
      electrical connection3-Pin MIL-C-5015
      pin assigNment (PIN A)Output signal 4 … 20 mA positive
      pin assigNment (PIN B)output signal 4 … 20mA negative
      pin assigNment (PIN C)Raw signal positive
      (M) metric mounting
      equipment
      M080A163¾ 16 M6 mounting bolts x 1-1
      PCB-(M)642A01

      Specific References

      Download

      642A01_drawing_1.PDF

      Technical drawing 1

      Download (120.33k)

      642A01_drawing_2.PDF

      Technical drawing 2

      Download (68.36k)

      642A01_manual.PDF

      Operating instructions

      Download (1.03M)

      642A01_specs.PDF

      Technical data sheet

      Download (88.49k)