PCB-482C15
basic data | |||
number channels | 4 | ||
sensor type | ICP, voltage | [2] | |
Spannungsverstä strength (±1%) (at 500 Hz) | 1 x / 10 x / 100 x | [2] | |
(maximum) output range | ±10 V | ||
lower limiting frequency (-5%) | 0.05 Hz | [1] | |
Upper cut-off frequency (-3 dB) | 50,000 Hz | ||
Upper cut-off frequency (-5%) | > 17,000 Hz | ||
phase shift (at 1,000 Hz) | ±1 ° | ||
Ü youõre (maximum) | -72 dB | ||
bias voltage/error (via LEDs) display | Open circuit/short circuit/overload | ||
Conditions of use | |||
temperature range (operation) | 32 … 120 ° F | 0 … 50 ° C | |
technical characteristics | |||
power supply (for supplied AC adaptor ) | AC | ||
mains voltage (47 … 63 Hz) | 100 … 240 V AC | ||
Power consumption (power supply unit) | ≤ 0.7 A | ||
power supply (sensor power supply unit) | DC voltage | ||
Power supply (sensor power supply unit) | 32 … 38 V DC | ||
power consumption ( Sensor-Versorgungseinheit) | < 0.25 A | ||
supply voltage (±1 V DC) (for sensor) | 26 V DC | ||
Constant power supply (for sensor) | 0 … 20 mA | [3] | |
± 10/5 V pk | Overload threshold (±1. 0 V pk) | [2] | |
DC Offset | < 20 mV | ||
output impedance | 50 Ω | ||
wide band noise (1 … 10,000 Hz) (amplification factor 1 x) | 5.6 µV rms | [4] | |
spectral noise (1 Hz) | 0.67 µV / √ Hz | [4] | |
Spectral noise (10 Hz) | 0,10 µV / √ Hz | [4] | |
spectral noise (100 Hz) | 0.06 µV/ √ Hz | [4] | |
spectral noise (1,000 Hz) | 0.06 µV/. √ Hz | [4] | |
spectral noise (10,000 Hz) | 0.05 µV / √ Hz | [4] | |
wide band noise (1 … 10,000 Hz) (Verstä rkungsfaktor 10 x) | 21 µV/rms | [4] | |
spectral noise (1 Hz) | 5.10 µV / √ Hz | [4] | |
spectral noise (10 Hz) | 0.60 µV / √ Hz | [4] | |
spectral noise (100 Hz) | 0.22 µV / √ Hz | [4] | |
spectral noise (1,000 Hz) | 0.22 µV / √ Hz | [4] | |
spectral noise (10,000 Hz) | 0.19 µV / √ Hz | [4] | |
wide band noise (1 … 10,000 Hz) (Verstä rkungsfaktor 100 x) | 165 µV/rms | [4] | |
spectral noise (1 Hz) | 57 µV / √ Hz | [4] | |
spectral noise (10 Hz) | 5.2 µV / √ Hz | [4] | |
spectral noise (100 Hz) | 1.7 µV / √ Hz | [4] | |
spectral noise (1,000 Hz) | 1.8 µV / √ Hz | [] 4] | |
spectral noise (10,000 Hz) | 1.4 µV / √ Hz | [4] | |
physical properties | |||
electrical connection (ICP® sensor input) | BNC-connector | ||
electrical connection (output) | BNC Jack | ||
electrical connection (DC power supply) | 5-pin DIN female | ||
Size - height | 3.2 in | 8.1 cm | |
size - width | 8.0 in | 20 cm | |
Size - deep | 5.9 in | 15 cm | |
Size | 1.25 lb | 567 grams | |
notes | |||
[1] | the lower cut-off frequency tolerance: ±25% | ||
[2] | Adjustable via internal jumper | ||
[3] | configurable, default setting at the factory: 4 mA (±0. 5 mA). The channels of k & wl; can be individually configured. | ||
[4] | typically | ||
[5] | details: see PCB Declaration of Conformance PS024 | ||
equipment | |||
017AXX | cord | -1 | |
488 B 04/NC | power supply | -1 |