PCB-352B30

PCB-352B30

  • ICP® vibration sensor,
  • With built-in low-pass filter,
  • Measuring range 500 g
  • Sensitivity 10 mV / g,
  • Frequency range 15 … 4,500 Hz,
  • 10-32 female connector above
  •  

    basic data
    sensitivity (±10%)10 mV / g1.02 mV/(m/s²) 
     
    range±500 g pk ±4. 905 m/s 2 pk 
     
    frequency range (±5%)15 … 4,500 Hz  
     
    Electric filter corner frequency10,000 Hz [2]
     
    the filter slope12 dB/octave [2]
     
    resonance frequency≥65,000 Hz  
     
    wide band resolution0.004 g RMS0.04 m/s² RMS [2]
     
    linearity≤1% [1]
     
    transverse acceleration sensitivity≤5%  
    Conditions of use
    Overload limit (shock)±10. 000 g pk±98.100 m/s² pk 
     
    Temperature range(Operation)-65 … 250 ° F-54 … 121 ° C 
     
    Strain sensitivity (base area)≤0.005 g/µε≤0.05 (m/s²)/µε[2]
    technical characteristics
    Supply voltage20 … 30 V DC  
     
    constant power supply2 … 20 mA  
     
    Output impedance≤100 Ω  
     
    Bias voltage8 … 13 V DC  
     
    discharging charging time constant< 0,1 s  
     
    Settling time < br(auf Bias-Spannung ±10 %)<5 s  
     
    spectral noise (1)1,500 µg / √Hz14.715 (µm / s ²) / √Hz[2]
     
    Spectral noise (10 Hz)500 µg / √Hz4.905 (µm / s ²) / √Hz[2]
     
    spectral noise (100 Hz)150 µg / √Hz1,472 ( µm / s ²) / √ Hz[2]
     
    spectral noise (1.000 Hz)50 µg / √Hz490 (µm / s ²) / √Hz[2]
    physical properties
    size - height0.87 in22 mm 
     
    Size - hex3/8 in9.5 mm 
     
    size0.25 oz7 g[2]
     
    sensor elementceramic  
     
    Geometry of the sensor elementshear principle  
     
    housing materialstainless steel  
     
    Sealinghermetically sealed  
     
    electrical connection10-32-coaxial socket  
     
    connection positionabove  
     
    Mounting thread10-32 male  
    notes
    [1]zero-based balancing line, determined using the method of least squares  
     
    [2]typically  
     
    [3]details: see PCBs Declaration of conformance PS023  
    included Accessories
    080Aadhesive mounting-1 
     
    080A109mounting wax-1 
     
    ACS-xxCalibration certificate, traceable to NIST-1 
    (M) metric mounting
    mounting threadM6 x 0.75 male  
     
    Accessories   
     
    M080Ametric adhesive attachment, 0.5 "hex x 0.187" high, M6 x 0.75 through thread-1 

    30 other articles of the same category: