PCB-3741B1230G
    zoom_out_map

      PCB-3741B1230G

    • MEMS accelerometer,
    • Suitable for measuring static accelerations,
    • Measurement range 30 g,
    • Sensitivity 66.7 mV / g,
    • Frequency range 0 … 1,000 Hz,
    • Supply voltage 6 … 30 V DC,
    • Integrated cable, length 3 m,
      ending on stripped and tinned ends
    • basic data
      sensitivity (±5%)66.7 mV / g6.80 mV/(m/s²)[1]
      range±30 g PK±294, 2 m/s 2 pk
      frequency range (±5%)0 … 1,000 Hz
      Frequency range (±10)0 … 1500 Hz
      resonance frequency> 4,000 Hz
      phase shift (100 Hz)< 10 °
      Wide band resolution3.5 mg rms0.034 m/s² RMS[2]
      linearity error≤ 1% FS[3]
      transverse acceleration sensitivity≤ 3%
      conditions of use
      Overload limit (shock) ±3. 000 g pk±29. 420 m/s² pk
      temperature range (operation)-65 … 250 ° F-54.0 … 121 ° C
      Temperature range (storage)-65 … 250 ° F-54.0 … 121 ° C
      Temperature coefficient of sensitivity the zero point±2, 0% FSO[4] [5]
      strain sensitivity (footprint)0.0002 g/µε0.002 (m/s²)/µε[2]
      technical characteristics
      Supply voltage6 … 30 V DC
      Power&le≤6 mA
      output impedance≤ 100 Ω
      Spannungsoffset± 40 mV DC[6]
      spectral noise (1)390 µg / √ Hz3,825 (µm / s ²) / √ Hz[2]
      electrical insulation (housing)≥ 100 MΩΩ[7]
      physical properties
      housing materialanodized aluminum
      waterproofingepoxy resin
      Size-Height0.30 in7.62 mm
      size - length1.00 in25.4 mm
      size - width0.85 in21,6 mm
      Dimensions (without cable)0.35 oz9.92 grams[2]
      electrical connectionintegrated cable
      Cable outletOn the side
      Cable terminationtinned ends
      cord typetype 010, 4-wire shielded cable
      Cable length10 ft3 m
      Mountingtwo mounting holes
      notes
      [1]measured at 100 Hz, 1 g RMS
      [2]typically
      [3]zero-based balancing line, determined using the method of least squares
      [4]FSO = "Full Scale Output": maximum output signal of the measuring range (4 V DC)).
      [5]-54 … 121 ° C, reference 24 ° C
      [6]Offset tolerance for standard cable length (3 m)
      [7]between housing/cable shielding and mounting surface or wire
      [8]details: see PCB Declaration of Conformance PS027
      Optional accessory
      080A208triaxial mounting cube-1
      equipment
      081A103mounting screw2
      ACS-103calibration of amplitude and phase response of 2 Hz up to the upper 5% frequency-1
      M081A103mounting screw and Washer, threaded M3 x 0.52
      PCB-3741B1230G

      Specific References

      Download

      3741B1230G_drawing.PDF

      Technical drawing

      Download (1.21M)

      3741B1230G_manual.PDF

      Operating instructions

      Download (2M)

      3741B1230G_specs.PDF

      Technical data sheet

      Download (442.13k)