PCB-(M)260A12

PCB-(M)260A12

  • Triaxial force sensor with charge output,
  • Measuring range (Z axis) 4.45 kN,
  • Measuring range (X - and Y-axes) 4.45 kN,
  • Sensitivity (Z-axis) 3.4 pC/N,.
  • Sensitivity (X - and Y-axes) 7.2 pC/N,.
  • Upper frequency limit 90,000 Hz,.
  • Three 10-32 connectors on the side

basic data
Sensitivity (X- and Y-axis) (± 15%)32 pC / lb7.19 pC / N[1]
 
Sensitivity (Z-axis) (± 15%)15 pC / lb3.37 pC / N[1]
 
Measurement range (Z axis)1,000 lb4.45 kN 
 
Measurement range (X- and Y-axis)1,000 lb4.45 kN 
 
Maximum force (Z-axis)1,320 lb5.87 kN 
 
Maximum force (X- and Y-axis)1,000 lb4.45 kN 
 
Maximum torque (Z-axis)40 ft-lb54.23 Nm 
 
Maximum torque (X- and Y-axis)70 ft-lb94.91 Nm 
 
Upper limit frequency90,000 Hz  
 
linearity error≤1% FS [2]
 
Crosstalk (between X and Y-axis)± 3%  
 
Crosstalk (between X / Y-axis and Z-axis)± 5%  
Operating conditions
temperature range-100 ... 350 ° F-73 ... 177 ° C 
Technical characteristics
capacity (all axes)30 pF [3]
 
Insulation resistance (all axes)≥1.000.000 MΩ  
 
Output polarity (in the direction of the markings)negative  
physical properties
preload?10.000 lb?44,48 kN[4]
 
Stiffness (Z-axis)19 lb / microinches3.3 kN / micron[3]
 
Stiffness (X- and Y-axis)6 lb / microinches1 kN / micron[3]
 
Size - Height0.390 in9,90 mm 
 
Size - Length1.25 in31.8 mm 
 
Size - Width1.25 in31.8 mm 
 
Size - inside diameter0.512 in13 mm 
 
Size - diameter of the measuring surface0.920 in23.37 mm 
 
Dimensions1.5 oz42.5 grams 
 
housing materialstainless steel  
 
sealhermetically sealed  
 
electrical connectionThree 10-32 coaxial sockets  
 
port locationLaterally  
Hints
[1]When the recommended preload. The sensitivities can change by ± 5%, depending on the used preload.  
 
[2]Zero-based line of best fit, determined by the method of least squares  
 
[3]typically,  
 
[4]The pre-load should be at least ten times the operating range used on the X and Y-axis.  
included supply
081A74Vorlastbolzen (for models 260A02, 260A12, and 260A32)-1 
 
082M12Washer (for models 260A02, 260A12, and 260A32)-1 
 
083A13Mounting sleeve (for models 260A02, 260A12, and 260A32)-1 
(W) Waterproof cable connection
cable outletLaterally  
(M) Metric assembly
included supply   
 
M081A74mounting bolts

9 other articles of the same category: