PCB-102B13
Cryogenic ICP® pressure sensor, 10k psi, 0.5 mV/psi, 3/8-24 mtg thd, ground isolated with safety wire holes
- Measurement Range: 10 kpsi (68950 kPa)
- Sensitivity: (±15%)0.5 mV/psi (0.073 mV/kPa)
- Low Frequency Response: (-5%)0.1 Hz
- Resonant Frequency: >=250 kHz (>=250 kHz)
- Electrical Connector: 10-32 Coaxial Jack
- Weight: 0.388 oz (11.00 gm)
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.
English: | SI: | ||
---|---|---|---|
Performance | |||
Measurement Range (for ±5V output) | 10 kpsi | 68950 kPa | |
Useful Overrange | 15 kpsi | 103425 kPa | |
Sensitivity (±15 %) | 0.5 mV/psi | 0.073 mV/kPa | |
Maximum Pressure (static) | 15 kpsi | 103425 kPa | |
Resolution | 200 mpsi | 1.4 kPa | [2] |
Resonant Frequency | ≥250 kHz | ≥250 kHz | |
Rise Time | ≤2.0 µ sec | ≤2.0 µ sec | |
Low Frequency Response (-5 %) | 0.1 Hz | 0.1 Hz | |
Non-Linearity | <1 % FS | <1 % FS | [1] |
Environmental | |||
Acceleration Sensitivity | ≤0.002 psi/g | ≤0.0014 kPa/(m/s²) | |
Temperature Range (Operating) | -320 to +212 °F | -196 to +100 °C | |
Temperature Coefficient of Sensitivity | ≤0.06 %/°F | ≤0.108 %/°C | |
Maximum Shock | 20000 g pk | 196140 m/s² pk | |
Electrical | |||
Output Polarity (Positive Pressure) | Positive | Positive | |
Discharge Time Constant (at room temp) | ≥5 sec | ≥5 sec | |
Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | <100 Ohm | <100 Ohm | |
Output Bias Voltage | 9 to 13 VDC | 9 to 13 VDC | |
Physical | |||
Sensing Element | Quartz | Quartz | |
Housing Material | Stainless Steel | Stainless Steel | |
Diaphragm | 316L Stainless Steel | 316L Stainless Steel | |
Sealing | Welded Hermetic | Welded Hermetic | |
Electrical Connector | 10-32 Coaxial Jack | 10-32 Coaxial Jack | |
Weight | 0.388 oz | 11.00 gm |
* All specifications are at room temperature unless otherwise specified.
Accessories
Supplied | ||
065A34 | Seal ring, 0.435" OD x 0.397" ID x 0.030" thk, Cu (for Model M102A10) | 3 |
065A44 | Seal ring, 0.435" OD x 0.377" ID x 0.030" thk, Cu (for Model 102A10) | 3 |
Optional Versions
(M) Metric Mount
Accessories: | |||
---|---|---|---|
Supplied | 065A34 | Seal ring 0.435" OD x 0.397" ID x 0.030" Cu | 3 |