PCB-102B10
Cryogenic ICP® pressure sensor, 100 psi, 50 mV/psi, 3/8-24 mtg thd, ground isolated with safety wire holes
- Measurement Range: 100 psi (690 kPa)
- Sensitivity: (±15%)50 mV/psi (7.25 mV/kPa)
- Low Frequency Response: (-5%)0.50 Hz
- Resonant Frequency: >=250 kHz (>=250 kHz)
- Electrical Connector: 10-32 Coaxial Jack
- Weight: 0.388 oz (11.00 gm)
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Due to high sensitivity, the static pressure should be applied and removed very slowly. Rate should prevent more than 10 Volt change in output until Output Bias Voltage returns to normal (approximately 15 times discharge time constant).
[4] Excitation voltage >=28 volts required.
[5] See PCB Declaration of Conformance PS023 for details.
English: | SI: | ||
---|---|---|---|
Performance | |||
Measurement Range (for ±5V output) | 100 psi | 690 kPa | |
Useful Overrange (for ± 10V output) | 200 psi | 1380 kPa | [4] |
Sensitivity (±15 %) | 50 mV/psi | 7.25 mV/kPa | |
Maximum Pressure (step) | 1000 psi | 6900 kPa | |
Maximum Pressure (Total) | 15 kpsi | 103425 kPa | [3] |
Resolution | 2 mpsi | 0.014 kPa | [2] |
Resonant Frequency | ≥250 kHz | ≥250 kHz | |
Rise Time (Reflected) | ≤2.0 µ sec | ≤2.0 µ sec | |
Low Frequency Response (-5 %) | 0.50 Hz | 0.50 Hz | |
Non-Linearity | ≤1.0 % FS | ≤1.0 % FS | [1] |
Environmental | |||
Acceleration Sensitivity | ≤0.002 psi/g | ≤0.0014 kPa/(m/s²) | |
Temperature Range (Operating) | -320 to +212 °F | -196 to +100 °C | |
Temperature Coefficient of Sensitivity | ≤0.06 %/°F | ≤0.108 %/°C | |
Maximum Shock | 20000 g pk | 196133 m/s² pk | |
Electrical | |||
Output Polarity (Positive Pressure) | Positive | Positive | |
Discharge Time Constant (at room temp) | ≥1.0 sec | ≥1.0 sec | |
Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | <100 Ohm | <100 Ohm | |
Output Bias Voltage | 8 to 14 VDC | 8 to 14 VDC | |
Physical | |||
Sensing Element | Quartz | Quartz | |
Housing Material | 304L/316L Stainless Steel | 304L/316L Stainless Steel | |
Thread Adaptor Material | 316L Stainless Steel | 316L Stainless Steel | |
Diaphragm | 316L Stainless Steel | 316L Stainless Steel | |
Sealing | Welded Hermetic | Welded Hermetic | |
Electrical Connector | 10-32 Coaxial Jack | 10-32 Coaxial Jack | |
Weight | 0.388 oz | 11.00 gm |
* All specifications are at room temperature unless otherwise specified.
Accessories
Supplied | ||
065A44 | Seal ring, 0.435" OD x 0.377" ID x 0.030" thk, Cu (for Model 102A10) | 3 |
Optional Versions
Accessories: | |||
---|---|---|---|
Supplied | 065A34 | Seal ring 0.435" OD x 0.397" ID x 0.030" Cu | 3 |