PCB-(M)261A01

PCB-(M)261A01

  • Triaxial ICP® power measurement element
  • Measuring range (Z axis) 4.45 kN,
  • Measuring range (X - and Y-axes) 2.22 kN,
  • Sensitivity (Z-axis) 0.56 mV / N,
  • Sensitivity (X - and Y-axes) 2.25 mV / N,
  • Frequency range (Z axis) 0.01 … 10,000 Hz,
  • Frequency range (X - and Y-axes) 0.001 … 10,000 Hz,
  • 4-pin female connector on the side

basic data
Sensitivity (Z-axis) (± 20%)2.5 mV / lb0.56 mV / N[2]
Sensitivity (X- and Y-axis) (± 20%)10 mV / lb2.25 mV / N[2]
Measurement range (Z axis)1,000 lb4.45 kN
Measurement range (X- and Y-axis)500 lb2.22 kN
Maximum force (Z-axis)1,320 lb5.87 kN
Maximum force (X- and Y-axis)660 lb2.94 kN
Maximum torque (Z-axis)14 ft-lb18.98 Nm
Maximum torque (X- and Y-axis)13 ft-lb17.63 Nm
Broadband resolution (Z-axis)0.006 lb RMS0.027 N RMS[1]
Broadband resolution (X- and Y-axis)0.002 lb RMS0.0089 N RMS[1]
Upper limit frequency10,000 Hz
Lower frequency limit (Z-axis) (-5%)0.01 Hz
Lower limit frequency (X and Y-axis) (-5%)0.001 Hz
linearity error≤1% FS[3]
Crosstalk (between X and Y-axis)± 3%
Crosstalk (between X / Y-axis and Z-axis)± 5%
Operating conditions
temperature range-65 ... 250 ° F-54 ... 121 ° C
Technical characteristics
Maximum output signal (Z-axis)± 2.5 V DC
Maximum output signal (X and Y-axis)± 5 V DC
Discharge time constant (Z-axis)?50 s
Discharge time (X and Y-axis)≥500 s
Supply voltage (all axes)20 ... 30 V DC
Constant current power supply (all axes)2 ... 20 mA
output impedance≤100 Ω
Bias voltage8 ... 14 V DC
Spectral Noise (X and Y axis) (1 Hz)0.00003 lb / Hz0.00134 N / Hz
Spectral noise (X- and Y-axis) (10 Hz)0.00015 lb / Hz0.000668 N / Hz
Spectral noise (X- and Y-axis) (100 Hz)0.00005 lb / Hz0.000223 N / Hz
Spectral noise (X- and Y-axis) (1000 Hz)0.000015 lb / Hz0.0000668 N / Hz
Spectral noise (Z-axis) (1 Hz)0.0015 lb / Hz0.0068 N / Hz
Spectral noise (Z-axis) (10 Hz)0.00055 lb / Hz0.00245 N / Hz
Spectral noise (Z-axis) (100 Hz)0.0002 lb / Hz0.000891 N / Hz
Spectral noise (Z-axis) (1000 Hz)0.000055 lb / Hz0.000245 N / Hz
output polaritypositive
physical properties
Stiffness (Z-axis)10 lb / microinches1.75 kN / micron[1]
Stiffness (X- and Y-axis)4 lb / microinches0.7 kN / micron[1]
Dimensions13.60 oz386 grams
housing materialstainless steel
sealhermetically sealed
electrical connection4-pin
port locationLaterally
Hints
[1]typically,
[2]When the recommended preload. The sensitivities can change by ± 5%, depending on the used preload.
[3]Zero-based line of best fit, determined by the method of least squares
[4]Details: see PCB Declaration of Conformance PS023
(W) Waterproof cable connection
cable outletLaterally

5 other articles of the same category: