PCB-HT(M)648A00

PCB-HT(M)648A00

  • Continuous use temperature up to 125 ° C,
  • vibration transmitter with power output according to
    the RMS of vibration acceleration,
  • measuring range 0 … 10 g RMS,
  • output range 4 … 20 mA,
  • frequency range 3 … 1,000 Hz,
  • 2-pin connector side,
  • freely adjustable
  • "

    basic data
    range0,0 … 10 g RMS0.0 … 98.1 m/s² RMS[1]"
     
    Output area4 … 20 mA  
     
    frequency range (± 10%)180 … 60,000 cpm3 … 1,000 Hz[2] [3]
     
    Wide band resolution0.05 g RMS0.49 m/s² RMS[4]
     
    Linearity error≤1%  
    conditions of use
    temperature range-40 … 257 ° F-40 … 125 ° C 
    technical Properties
    power12 … 30 V DC  
     
    settling time (area within ±2% of full scale)  
     
    electrical insulation (housing)>100 MΩ  
    physical properties
    size - hex7/8 in22,.2 mm 
     
    size - height1.68 in42.6 mm 
     
    weight3.9 oz111 grams 
     
    Mounting thread¾-16 female thread  
     
    Assembly torque3 … 5 ft-lb4 … 7 Nm 
     
    sensor elementceramic  
     
    Geometry of the sensor elementshear principle  
     
    housing materialstainless steel  
     
    Sealinghermetically sealed welded  
     
    Electrical connection2-pin connector (MIL-C-5015)  
     
    connection positionside  
     
    pin assigNment ( PIN A)output signal 4 … 20 mA positive  
     
    pin assigNment (PIN B)output signal 4 … 20mA negative  
    notes
    [1]Conversion factor 1 in / sec = 0.0254 m/sec.  
     
    [2]1 Hz 60 = cpm ("Cycles Per Minute": rpm).  
     
    [3]frequencies below 5 Hz, the output signal fluctuates.  
     
    [4]typical value  
     
    [5]details: see PCB Declaration of Conformance PS039  
    equipment
    080A162mounting bolt ¾-16 on 1/4"-28-1 
     
    ICS-4" Frequency response cpm for uniaxial sensors from 0 (0 Hz) up to the upper 10% frequency of vibration transmitter-1 
    (RV) raw signal output - 100 mV/g (±20%)
    wiring3 MIL-C-5015 pin  
     
    pin assigNment (PIN A)output signal 4 … 20 mA positive  
     
    pin assigNment (PIN B)output signal 4 … 20mA negative  
     
    pin assigNment (PIN C)raw signal positive  
    (M) metric mounting
    equipment   
     
    M080A163mounting bolts M6 x ¾-16 1-1 

    30 other articles of the same category: