PCB-HT(M)641B62

PCB-HT(M)641B62

  • Continuous use temperature up to 125 ° C,
  • vibration transmitter with power output according to
    the RMS value of vibration speed,
  • measuring range 0 … 50.8 mm / s RMS,
  • output range 4 … 20 mA,
  • Frequency range 10 … 1,000 Hz,
  • integrated armored cable, length 3 m,
    ending on cut end
  • ""

    basic data
    range0,0 … 2 in / s RMS0.0 … 50.8 mm / s RMS[1]"
     
    Output area4 … 20 mA  
     
    frequency range (± 10%)600 … 60,000 cpm10 … 1,000 Hz[2] [3]
     
    Wide band resolution0.01 in / s RMS/0.26 mm / s RMS[4]
     
    Linearity error≤1%  
    conditions of use
    temperature range-40 … 257 ° F-40 … 125 ° C 
    technical Properties
    power12 … 30 V DC  
     
    settling time (area within ±2% of full scale)  
     
    electrical insulation (housing)> 100,000,000Ω  
    physical properties
    size -. Allen1.0 in25.4 mm 
     
    size - height4.2 in107 mm 
     
    dimensions (without cable)4.7 oz131 grams 
     
    Mounting thread1/4 "-28 UNFNo metric equivalent 
     
    Assembly torque3 … 5 ft-lb4 … 7 Nm 
     
    sensor elementceramic  
     
    geometry the sensor elementshear principle  
     
    housing materialstainless steel  
     
    sealinghermetically sealed welded  
     
    Electrical connectionintegrated armoured cable  
     
    cable outlettop  
     
    Terminal assigNment (red wire)output signal 4 … 20 mA positive  
     
    pin assigNment (blue wire)output signal 4 … 20mA negative  
     
    Cable length10 ft3.0 m 
     
    cable typepolyurethane [5]
    notes
    [1]conversion factor 1 in / sec = 0.0254 m/sec.  
     
    [2]at frequencies below 5 Hz, the output signal fluctuates.  
     
    [3]1 Hz 60 = cpm ("Cycles Per Minute": rpm).  
     
    [4]typically  
     
    [5]two-core cable with stainless steel reinforcement  
     
    [6]Details: see PCBs Declaration of conformance PS039  
    Equipment
    081A40mounting bolts with 1/4 "-28 thread-1 
     
    ICS-4frequency response for uniaxial" Cpm sensors from 0 (0 Hz) up to the upper 10% frequency of vibration transmitter-1 
    (RV) raw signal output - 100 mV/g (±20%)
    electrical connectionintegrated armoured cable  
     
    Connections (red wire)output signal 4 … 20 mA positive  
     
    (black wire) pin assigNmentoutput signal 4 … 20 mA negative  
     
    Pin assigNment (white wire)raw signal positive  
     
    Pin assigNment (green wire)raw signal negative  
    (M) metric mounting
    equipment   
     
    M081A61metric mounting bolts with M6 thread-1 

    30 other articles of the same category: