PCB-HT(M)640B02

PCB-HT(M)640B02

  • Continuous use temperature up to 125 ° C,
  • vibration transmitter with power output according to
    the peak value of vibration speed,
  • measuring range 0 … 50.8 mm / s,
  • output range 4 … 20 mA,
  • Frequency range 3 … 1,000 Hz,
  • 2-pin female connector above
  • """

    basic data
    range0,0 … 2 in / s pk0.0 … 50.8 mm / s pk[1]
     
    Output area4 … 20 mA  
     
    frequency range (± 10%)180 … 60,000 cpm3 … 1,000 Hz[2] [3]
     
    Wide band resolution0.005 in / s pk0.13 mm / s pk[4]
     
    linearity error≤1%  
    conditions of use
    temperature range-40 … 257 ° F-40 … 125 ° C 
    technical characteristics
    Supply voltage12 … 30 V DC  
     
    settling time (area within ±2% of full scale)  
     
    electrical insulation (housing)>100 MΩ  
    physical properties
    size - hex1.0 in25.4 mm 
     
    Size - height2.6 in66 mm 
     
    weight4.7 oz131 grams 
     
    mounting thread1/4 "-28 UNFNo metric equivalent 
     
    Assembly torque3 … 5 ft-lb4 … 7 Nm 
     
    sensor elementceramic  
     
    geometry the sensor elementshear principle  
     
    housing materialstainless steel  
     
    sealinghermetically sealed welded  
     
    Electrical connection2-pin connector (MIL-C-5015)  
     
    connection positionabove  
     
    Terminal assigNment (PIN A)Output signal 4 … 20 mA positive  
     
    Pin assigNment (PIN B)output signal 4 … 20mA negative  
    notes
    [1]conversion factor 1 in / sec = 0.0254 m/sec.  
     
    [2]at frequencies below 5 Hz, the output signal fluctuates.  
     
    [3]1 Hz 60 = cpm ("Cycles Per Minute": rpm).  
     
    [4]typically  
     
    [5]details: see PCB Declaration of Conformance PS039  
    equipment
    081A40mounting bolts with 1/4 "-28 thread-1 
     
    ICS-4frequency response" cpm for uniaxial sensors from 0 (0 Hz) up to the upper 10% frequency of vibration transmitter-1 
    (RV) raw signal output - 100 mV/g (±20%)
    wiring3-pin MIL-C-5015  
     
    pin assigNment (PIN A)output signal 4 … 20 mA positive  
     
    pin assigNment (PIN B)output signal 4 … 20 mA negative  
     
    pin assigNment (PIN C)raw signal positive  
    (M) metric mounting
    equipment   
     
    M081A61metric mounting bolts with M6 thread-1 

    30 other articles of the same category: