PCB-HT(M)602D11

PCB-HT(M)602D11

  • Industrial ICP® vibration sensor,
  • Continuous use temperature up to 163 ° C,
  • With through hole,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.8 … 8,000 Hz,
  • One-point calibration at 100 Hz,
  • Integrated cable, length 3 m,
    ending on cut end
  • basic data
    sensitivity (±10%)100 mV/g10.2 mV/(m/s²)[1]
    measuring range±50 g±490 m / s²
    Frequency range (± 3 dB)48 … 480,000 cpm0.8 … 8,000 Hz[4] [5]
    resonance frequency1,500 kcpm25,000 Hz[2]
    Wide band resolution150 µg1.472 µm / s ²[2]
    linearity≤1%[3]
    Transverse acceleration sensitivity≤ 5%
    conditions of use
    Overload limit (shock)5,000 g pk49,050 m/s² pk
    temperature range-65 … 325 ° F-54 … 162 ° C
    Type of protectionIP67
    Technical characteristics
    settling time (on bias voltage ± 1%)≤ 2.0 s
    discharging charging time constant≥ 0.2 s
    Power18 … 28 V DC
    constant power supply2 … 20 mA
    Output impedance< 150 Ω
    Bias voltage8 … 12 V DC
    Spectral noise (10 Hz)9.0 µg / √ Hz88,3 (µm / s ²) / √ Hz[2]
    spectral noise (100 Hz)4.0 µg / √ Hz39.2 (µm / s ²) / √ Hz[2]
    spectral noise (1,000 Hz)2.0 µg / √ Hz19.6 (µm / s ²) / √ Hz[2]
    Electrical insulation≥ 100 MΩ
    physical properties
    size - length2.1 in53.3 mm
    size ße - width1.0 in25.4 mm
    size - height1.0 in25.4 mm
    dimensions (without cable)5.4 oz153 grams
    Assembly torque2 … 5 ft-lb2.7 … 6.8 Nm
    sensor elementceramic
    geometry of the sensor elementShear principle
    Housing materialstainless steel
    electrical connectionintegrated cable
    Cable outletOn the side
    Cable terminationcut end
    electrical connection (white wire)signal / supply
    Electrical connection (black wire)ground
    cable length10 ft3.0 m
    cable typetype 055. screened two-core cable with Teflon coating and reinforcing
    notes
    [1]conversion factor 1 g = 9.81 m/s²
    [2] Typically
    [3]zero-based balancing line, determined using the method of least squares
    [4]The upper cut-off frequency tolerance: ±10%
    [5]1 Hz 60 = cpm ("Cycles Per Minute": rpm).
    [6]details: see PCBs Declaration of conformance PS023
    equipment
    081A73mounting screw 1/4 "-28 x 1.34 "-1
    (M) metric mounting
    equipment
    M081A73metric mounting bolt with M6 threads-1

    30 other articles of the same category: