PCB-682A02

PCB-682A02

  • ICP® power supply unit,
  • For mounting on a DIN rail

Basic data
Number of channels1
Voltage gain1 x / 10 x / 100 x[1]
Frequency range (± 1 dB)60... more than 6,000,000 cpm1... 100,000 Hz[2]
Linearity error≤2% <
Conditions of use
Temperature range32... 158 ° F0... 70 ° C
Technical properties
SupplyDC voltage
Voltage (±10 %)24 V DC
Power consumption≤60 mA
Supply voltage (±1 V <)small >DC) (for sensor)18 V DC[3]
Constant power supply (for sensor)4/10 mA[1]
Spectral noise (10 Hz)0.8 µV/√Hz[7] [5]
Spectral RAsmall house (100 Hz)0.5 µV/√Hz[7] [5]
Spectral noise (1,000 Hz)0.5 µV/√Hz[7] [5]
Spectral noise (10,000 Hz)0.6 µV/√Hz[7] [5]
Wide band noise (1... 10,000 Hz)50µV[7] [5]
Spectral noise (10 Hz)7.5 µV/√Hz[6] [5]
Spectral noise (100 Hz)3.6 µV/√Hz[6] [5]
Spectral noise (1,000 Hz)3.2 µV/√Hz[6] [5]
Spectral noise (10,000 Hz)6.0 µV/√Hz[6] [5]
Wide band noise (1... 10,000 Hz)400 µV</td>[6] [5]
Spectral noise (10 Hz)80 µV/√Hz[4] [5]
Spectral noise (100 Hz)40 µV/√Hz[4] [5]
Spectral noise (1,000 Hz)32 µV/√Hz[4] [5]
Spektrales noise (10,000 Hz)50 µV/√Hz[4] [5]
Wide band noise (1... 10,000 Hz)3.5 mV[4] [5]
Backup0.0416666666666667
Physical properties
Connection (ICP® sensor input)Connection terminals
Connection (output)Connection terminals
Connection (DC power supply)Connection terminals
AssemblyOn top-hat rail
Size - height3.1 in78.7 mm
Size - width0.97 in24.6 mm
Size - depth3.3 in83.8 mm
Mass0.194 lb0.088 kg
Notes
[1]Adjustable via internal jumper
[2]1 Hz = cpm 60 ("Cycles Per Minute": revolutions per minute)
[3]The bias voltageof the connected sensor maximum 13 V should DC If at all, otherwise the positive measuring range is reduced or the sensor does not work.
[4]Gain 100
[5]Typically
[6]Gain 10
[7]Gain 1
Additional informations
InputICP® sensor
OutputsReal-time signal,
Gain 1 x / 10 x / 100 x,
Range of ±6 V
Usage purposeICP® sensor power supply

2 other articles of the same category: