PCB-M1630-04C
    zoom_out_map

      PCB-M1630-04C

    • S type load cell,
    • Measuring range 500 N,
    • Nominal 2 mV / V,
    • Integrated cable, length 3 m,
      ending on open ends
    • basic data
      measuring range112 lb500 N[1]
       
      value (±10%)2 mV / V [2]
       
      linearity error≤0.15% FS  
       
      hysteresis≤0.15% FS  
       
      repeatability? 0.05 %RO  
       
      Resonance frequency1,800 Hz  
       
      creep error≤0.08%  
      conditions
      Ü berlastlimit168 lb750 N 
       
      maximum capacity < br(Seitlich einwirkende Kraft, FX oder FY) )11.2 lb50 Ω[4]
       
      maximum capacity < br(Biegemoment, MX oder MY)22,1 in-lb2.5 Nm[4]
       
      maximum capacity < br(Axiales Drehmoment, MZ)22.1 lb2.5 Nm[4]
       
      Temperature range (operation)0 … 200 °F18 … 93 ° C 
       
      temperature range (offset)75 … 150 ° F21 … 65 ° C 
       
      temperature impact on the Output (max)±0, 002% of reading / ° F±0, 0036% of reading / ° C[3]
       
      temperature effect on zero signal deviation (maximum)±0. 00?5 %FS/°F/±0, 027% FS / ° C[3]
      technical characteristics
      Bridge resistance350Ω [2]
       
      supply voltage (recommended)10 V DC [5]
       
      insulation resistance> 5,000 M ?  
       
      Zero signal deviation≤ 1% FS  
       
      output polaritypositive when pull  
      physical properties
      size -. Length2.00 in51 mm[6]
       
      size - height2.50 in64 mm 
       
      size - width0.625 in16 mm 
       
      Weight0,23lb104 g 
       
      housing materialaluminum  
       
      sensor elementstrain  
       
      Aspect ratio at full load0.002 in0.05 mm 
       
      Wiringintegrated cable, length 3 m  
       
      cable outletside  
      notes
      [1]FS = "Full Scale": full scale  
       
      [2]nominal  
       
      [3]over the compensated temperature range  
       
      [4]Insulated load the load cell with the named power or with the designated moment < br(keine zusätzlichen Belastungen)  
       
      [5]calibrated with 10 V DC supply voltage; Power supply with 5 … 20 V DC or V AC RMS possible  
       
      [6]details of the dimensions : see technical drawing  
      PCB-M1630-04C

      Specific References

      Download

      M1630-04C_drawing.pdf

      Technical drawing

      Download (396.48k)

      M1630-04C_manual.pdf

      Operating instructions

      Download (956.72k)

      M1630-04C_specs.pdf

      Technical data sheet

      Download (72.08k)