PCB-485B39

Digital ICP - USB Signal Conditioner

  • Easily save and share data on-the-go
  • Plug & play signal conditioning
  • Makes high quality measurement more accessible
  • Pocket-sized, USB powered, portable signal conditioning
  • Analysis options from time domain to RMS to FFT and more
  • Simplifies measurement chain without sacrificing quality
  • No driver installation required

MODEL 485B39 SPECIFICATIONS

Performance

Specification

Channel Count 

2

Voltage Range (Nominal)

± 10 V pk [1] 

ADC Resolution

 24-bit[2]

Frequency Range (± 5 %)

 0.8 Hz to 20.7 kHz

Sample Rate

 48, 44.1, 32, 22.05, 16, 11.025, 8 kHz

Antialiasing Lowpass Filter (-3 dB) at 48 kHz

22.9 kHz[3]

AC High Pass Filter (-3 dB) (48 kHz to 8 kHz)

1 Hz to 0.5 Hz[4]

Digital Output Interface

USB Class 1 Audio

Physical

Specification

Temperature Range (Operating)

14 °F to +176 °F (-10 °C to +80 °C)

Temperature Range (Storage)

-40 °F to +176 °F (-40 °C to +80 °C) 

Excitation Voltage to Sensor (± 5 %)

24 V DC

Constant Current Excitation (± 5 %)

4 mA

DC Power (USB)

< 500 mW (5 V at 100 mA) 

Settling Time

1,5s

Electrical Isolation (case)

Grounded

Data / Power Indicator

Green LED 

Housing Material

Stainless Steel 

Size (length x width x height) 

2.36″ x 1.5″ x 0.9″ (60 mm x 38 mm x 23 mm)

Weight

4.4 oz (125 grams)

Sensor Inputs

2 BNC jacks

Digital Output

11″ Integral Cable (28 cm Integral Cable)

USB Connector

Type A

Optional Accessories 

MD821AM/A USB A to Lightning camera adaptor

USB A to USB OTG adaptor

 Inline ICP® charge converter (422Exx Series)

[1] ±8 V pk guaranteed

[2] 16-bit selectable by software

[3] Proportional to sample rate

[4] Sample rate dependent (48 kHz to 8 kHz)