PCB-054216-01144
    zoom_out_map

      PCB-054216-01144

      • DMS miniature measuring washer
        for the measurement of static forces,
      • Screw diameter 16 mm,.
      • Measuring range 140 kN
      • Nominal 1.5 mV / V,.
      • Integrated cable, length 1.5 m,
        ending on open ends

       

      basic data
      measurement range31.473 lb140 kN[2]
       
      factor1,50 mV / V [1] [2]
       
      Linearitä avoidable±5% FS [1]
       
      hysteresis±5% FS [1]
       
      repeatability±2% FS [1]
       
      Resonance frequency10,000 Hz  
      conditions of use
      Overload limit47.210 lb≥10 kΩ 
       
      Temperature range (operation)0 …200 °F18 … 93 ° C 
       
      Temperature range (offset)not specified  
       
      influence of temperature on the output signal (maximum)±0, 02% of measured value / ° F±0. 036% of reading / ° C[3]
       
      temperature influence on (max) zero signaldeviation/±0, 02% FS / °F/±0, 036% FS / ° C[1]
      technical Properties
      Bridge resistance350Ω [2]
       
      supply voltage (recommended)10 V DC [4]
       
      output polaritypositive  
      physical properties
      size - diameter1,348 in34.2 mm 
       
      Size - height0.525* in13.3 mm 
       
      screw diameter0,630 in16 mm 
       
      Diameter of the bore hole0,636 in16.16 mm 
       
      sensor elementstrain  
       
      wiringTinned ends  
       
      cable exitside  
      notes
      [1]FS = "Full Scale": full scale  
       
      [2]nominal  
       
      [3]over the compensated temperature range  
       
      [4]calibrated 10 v DC supply voltage; Power supply with 5 … 20 V DC or V AC RMS possible  
      PCB-054216-01144

      Specific References

      Download

      0542xx-01xxx_drawing.pdf

      Technical drawing

      Download (466.12k)

      054216-01144_manual.pdf

      Operating instructions

      Download (422.66k)

      054216-01144_specs.pdf

      Technical data sheet

      Download (13.43k)